Analog Devices MAX704SCSA+ Battery Backup Circuit, supervisor IC, active-low reset, push-pull output, 2.925V threshold, 140ms timeout, 8-SOIC surface mount, 0-70°C.
| Parameter | Value |
|---|---|
| Type | Battery Backup Circuit |
| Mounting type | Surface Mount |
| Voltage - threshold | 2.925V |
| Number of voltages monitored | 1 |
| Operating temperature | 0°C ~ 70°C (TA) |
| Reset | Active Low |
| Output | Push-Pull, Totem Pole |
| Package | Tube |
| Reset timeout | 140ms Minimum |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
The MAX704SCSA+ is a battery-backup supervisor from Analog Devices, monitoring a single voltage rail with a 2.925V threshold. Operating from 0°C to 70°C, this part targets commercial-temperature equipment where a clean power-on reset and battery-backup switchover are needed.
Supplied in tube format, the package suits both prototype hand-assembly and low-to-mid volume pick-and-place runs.
The reset timeout is a minimum of 140ms, and the voltage threshold is 2.925V. The output is active-low, push-pull, so it drives a logic low during reset without needing an external pull-up resistor.