The MAX701EPA+: The reset stays asserted for a minimum of 200ms after the rail recovers, giving the system time to stabilize before the processor starts executing code. This is the kind of part you find on a board where the microcontroller needs a clean release from reset after a brownout or power-up. The 8-PDIP through-hole package means it's socket-friendly for prototyping or repair — you can swap it without hot air, which matters when you're diagnosing a board that won't boot and you want to rule out the supervisor first.
Temperature range and operating conditions
The 4.65V threshold is typical for monitoring a 5V rail — it triggers before the rail drops below the minimum operating voltage of most 5V logic, giving the supervisor time to hold the system in reset before the logic starts behaving unpredictably. The 8-DIP package (0.300-inch width, 7.62mm pitch) is a standard footprint that fits through-hole sockets or solders directly into plated-through holes. The 200ms minimum reset timeout is long enough to cover most power supply ramp-up times but short enough that the system isn't waiting unnecessarily to start.