Skip to main content
Analog Devices MAX680CSA+ — Crystals & Oscillators
Analog Devices

MAX680CSA+ Charge Pump IC – Analog Devices, 8-SOIC, Active

MPNMAX680CSA+
End of Life

Analog Devices MAX680CSA+, charge pump DC-DC converter, ratiometric topology, fixed output, 2V to 6V input range, ±2Vin output, 10mA per rail, 8kHz switching, 8-SOIC package, tube, surface mount.

$6.08Ref. price · indicative, final on quote
MAX680CSA+ datasheet
Packaging8-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MAX680CSA+ Technical Specifications
ParameterValue
Output typeFixed
Mounting typeSurface Mount
Voltage - input6V
Voltage - output (Min (Fixed))±2Vin
Current - output10mA
Frequency8kHz
Number of outputs2
Operating temperature0°C ~ 70°C (TA)
PackageTube
FunctionRatiometric
TopologyCharge Pump
Case8-SOIC (0.154\", 3.90mm Width)
Output configurationPositive and Negative (Dual Rail)
Synchronous rectifierNo

Product details

Charge pump with dual-rail output

The MAX680CSA+ is a charge pump DC-DC converter from Analog Devices that generates both positive and negative output rails from a single input supply — no inductor needed. It accepts an input voltage from 2V to 6V and delivers a fixed output of ±2× the input voltage. Each of the two outputs is rated for 10 mA continuous, making this part suitable for biasing op-amp rails, LCD contrast supplies, or small sensor circuits where a split supply is required from a single battery or 5V rail. The switching frequency is fixed at 8 kHz — low enough to keep external capacitor sizes modest (typically 10 µF) and minimise radiated noise in sensitive analog paths.

Package and temperature grade

The footprint is standard SOIC-8, compatible with many second-source charge pump ICs. Rated for the commercial temperature range of 0°C to 70°C, this part is intended for indoor or controlled-environment equipment — not for automotive or extended industrial use.

Lifecycle and ordering posture

ROHS3 compliant, it meets current environmental regulatory requirements for European and global markets. Sourced per RFQ — confirm the BOM quantity and preferred lead time with your account representative.

Frequently asked questions

Can the MAX680CSA+ generate both positive and negative voltages?

Yes, it has two outputs configured as positive and negative rails (dual-rail output). The positive output is +2×Vin, the negative output is -2×Vin.

What is the output current rating of the MAX680CSA+?

Each output is rated for 10 mA continuous. The total load across both rails should not exceed this per-output limit.

Does the MAX680CSA+ require external capacitors?

Yes, as a charge pump it needs external capacitors for the flying and reservoir stages. Typical values are 10 µF, but the datasheet provides the full selection guidance.