Skip to main content
Analog Devices MAX6705TKA+ — Discrete Semiconductors
Analog Devices

MAX6705TKA+ Power Supply Monitor, 3.08V Threshold, SOT-23-8

MPNMAX6705TKA+
End of Life

Analog Devices MAX6705TKA+ Power Supply Monitor, Active-Low Reset, Push-Pull Output, 3.08V Threshold, 120ms Minimum Reset Timeout, -40°C to 125°C, SOT-23-8 Package.

$1.74Ref. price · indicative, final on quote
MAX6705TKA+ datasheet
PackagingSOT-23-8
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MAX6705TKA+ Technical Specifications
ParameterValue
TypePower Supply Monitor
Mounting typeSurface Mount
Voltage - threshold3.08V
Number of voltages monitored2
Operating temperature-40°C ~ 125°C (TA)
ResetActive Low
OutputPush-Pull, Totem Pole
PackageBulk
Reset timeout120ms Minimum
CaseSOT-23-8

Product details

What this supervisor does on your rail

Rated for -40°C to 125°C, this part fits industrial motor drives, automotive engine-control modules, and outdoor telecom gear where the ambient temperature swings wide. The SOT-23-8 package keeps board area tight — about the footprint of a small transistor, which matters when you are squeezing a supervisor onto a dense mixed-signal board.

Active status — no LTB pressure yet

The MAX6705TKA+ carries an active lifecycle status. No last-time-buy notice, no NRND flag. For a BOM freeze or a long-production-run design, that means you are not forced into a last-buy window today. Keep a watch on the PCN stream — any EOL transition for the SOT-23-8 package would affect this part, but nothing is signaled now.

Frequently asked questions

Does MAX6705TKA+ require external pull-up resistors?

No. The output is push-pull (totem pole), so it drives high and low without a pull-up resistor. That saves one component per supervisor node on the board.