Skip to main content
Analog Devices MAX6705LKA+T — Power Management (PMIC / Gate Driver)
Analog Devices

MAX6705LKA+T Multi-Voltage Supervisor, SOT-23-8, Active Low

MPNMAX6705LKA+T
End of Life

Analog Devices MAX6705LKA+T multi-voltage supervisor, 2-channel, active-low push-pull reset, 4.63V/Adj thresholds, 140ms timeout, SOT-23-8, -40°C to +125°C.

$5.75Ref. price · indicative, final on quote
PackagingSOT-23-8
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MAX6705LKA+T Technical Specifications
ParameterValue
TypeMulti-Voltage Supervisor
Mounting typeSurface Mount
Voltage - threshold4.63V, Adj
Number of voltages monitored2
Operating temperature-40°C ~ 125°C (TA)
ResetActive Low
OutputPush-Pull, Totem Pole
PackageTape & Reel (TR); Cut Tape (CT)
Reset timeout140ms Minimum
CaseSOT-23-8

Product details

SOT-23-8 supervisor with dual-voltage monitoring

The MAX6705LKA+T is a 2-channel multi-voltage supervisor in an 8-pin SOT-23-8 package — the same footprint as a basic op-amp, so it fits into tight mixed-signal boards without a layout change. One channel monitors a fixed 4.63V threshold; the second is adjustable via an external resistor divider, letting you set the secondary rail trip point anywhere below the reference.

Temperature range and board-fit decisions

The SOT-23-8 package has a 0.65mm pitch and a 2.9mm x 1.6mm body — no thermal pad underneath, so the junction-to-ambient thermal resistance is higher than a DFN, but the 10µA typical supply current keeps self-heating negligible in most designs.

Sourced through franchised and independent distribution; lead time and current pricing confirmed at RFQ against your BOM quantity.

Frequently asked questions

What does the 140ms minimum reset timeout mean for my system?

The reset output stays low for at least 140ms after all monitored voltages cross their thresholds — long enough for most power supplies to settle and for the system clock to stabilize before the processor starts executing code. If your power-good sequence requires a longer delay, you can cascade this supervisor with an external RC timer on the adjustable channel.