Skip to main content
Analog Devices MAX660ESA+ — Discrete Semiconductors
Analog Devices

MAX660ESA+ Charge Pump IC, 100 mA, 8-SOIC, Active

MPNMAX660ESA+
End of Life

Maxim Integrated MAX660ESA+, charge pump voltage converter, 100 mA output, ratiometric, 1.5 V to 5.5 V input, -Vin or 2Vin output, 8-SOIC, -40°C to 85°C.

$10.36Ref. price · indicative, final on quote
MAX660ESA+ datasheet
Packaging8-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MAX660ESA+ Technical Specifications
ParameterValue
Output typeFixed
Mounting typeSurface Mount
Voltage - input5.5V
Voltage - output (Min (Fixed))-Vin, 2Vin
Current - output100mA
Frequency10kHz, 80kHz
Number of outputs1
Operating temperature-40°C ~ 85°C (TA)
PackageTube
FunctionRatiometric
TopologyCharge Pump
Case8-SOIC (0.154\", 3.90mm Width)
Output configurationPositive or Negative
Synchronous rectifierNo

Product details

The MAX660ESA+ from Maxim Integrated is a charge-pump voltage converter that delivers up to 100 mA from a 1.5 V to 5.5 V input rail. It generates either a negative voltage equal to -Vin or a doubled positive voltage of 2Vin, selected by pin configuration.

Lifecycle and sourcing

The MAX660ESA+ carries an Active lifecycle status with ROHS3 compliance.

Package and mounting

Supplied in a tube of 8-SOIC (0.154", 3.90 mm width) surface-mount packages. The SOIC-8 footprint is standard and widely supported. If your pick-and-place line expects tape-and-reel, verify the packing option — this listing is for tube.

Frequently asked questions

Can MAX660ESA+ generate a negative voltage?

Yes, in inverter mode the output equals -Vin, producing a negative rail from a positive input.

Does MAX660ESA+ require external capacitors?

Yes, a charge pump topology requires two external capacitors — one flying capacitor and one output reservoir capacitor. Values are given in the datasheet.

What is the difference between MAX660ESA+ and MAX660CPA+?

The MAX660CPA+ is the same die in a DIP-8 package (through-hole), while the MAX660ESA+ is in an SOIC-8 surface-mount package. Electrical specs are identical.