Skip to main content
Analog Devices MAX6467XS29D3+T — Analog & Data Acquisition
Analog Devices

MAX6467XS29D3+T Simple Reset/Power-On Reset

MPNMAX6467XS29D3+T
End of Life

Analog Devices MAX6467XS29D3+T, Simple Reset/Power-On Reset, Active Low, Open Drain, SC-82A/SOT-343, SC-70-4, 2.925V Threshold, 150ms Reset Timeout, -40°C to 125°C.

$3.75Ref. price · indicative, final on quote
MAX6467XS29D3+T datasheet
PackagingSC-82A, SOT-343
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MAX6467XS29D3+T Technical Specifications
ParameterValue
TypeSimple Reset/Power-On Reset
Mounting typeSurface Mount
Voltage - threshold2.925V
Number of voltages monitored1
Operating temperature-40°C ~ 125°C (TA)
ResetActive Low
OutputOpen Drain or Open Collector
PackageTape & Reel (TR); Cut Tape (CT)
Reset timeout150ms Minimum
CaseSC-82A, SOT-343

Product details

What this supervisor does and where it fits

The -40°C to 125°C operating range covers industrial and automotive under-hood environments — motor drives, engine ECUs, outdoor telecom gear, and factory-floor controllers where the board sees wide temperature swings. The SC-70-4 package (also listed as SC-82A/SOT-343) is a compact surface-mount footprint suited for space-constrained designs.

Open-drain output — the pull-up resistor is on you

The open-drain output sinks current to ground but cannot source it. An external pull-up resistor to the monitored rail or the MCU's supply is required for the reset signal to go high.

Active production — no end-of-life concern for new designs

The MAX6467XS29D3+T carries an Active lifecycle status. ROHS3 compliance is confirmed, so it meets the latest European restriction directives for lead and other substances.

Frequently asked questions

Is the MAX6467XS29D3+T RoHS compliant?

Yes, the MAX6467XS29D3+T is ROHS3 compliant, meeting the latest EU restriction-of-hazardous-substances requirements.

Does the MAX6467XS29D3+T require an external pull-up resistor?

Yes, because the output is open-drain, an external pull-up resistor is required for the reset signal to reach a valid high level. Without it, the output floats when not asserted.

What is the closest pin-compatible alternative to the MAX6467XS29D3+T in this family?

The MAX6467XS29D2+T is the same device with a different voltage threshold — 2.925V for the D3 variant versus a different threshold for the D2. Pin-compatible across the MAX6467 family, but verify the threshold matches your rail before substituting.