Analog Devices MAX6362PUT29+T battery backup circuit, active-low reset, open-drain output, 2.93V threshold, 150ms minimum reset timeout, SOT-23-6 package, -40°C to 85°C operating temperature.
| Parameter | Value |
|---|---|
| Type | Battery Backup Circuit |
| Mounting type | Surface Mount |
| Voltage - threshold | 2.93V |
| Number of voltages monitored | 1 |
| Operating temperature | -40°C ~ 85°C (TA) |
| Reset | Active Low |
| Output | Open Drain or Open Collector |
| Package | Bulk |
| Reset timeout | 150ms Minimum |
| Case | SOT-23-6 |
The open-drain output requires an external pull-up resistor to the monitored supply or the system's logic voltage. This lets the reset signal be shared across multiple ICs or pulled to a different voltage than the supervisor itself runs on. The output is active-low, so the processor sees a low during reset and a high-impedance state when the supply is good.
The MAX6362PUT29+T carries an active lifecycle status and is ROHS3 compliant.
The reset threshold voltage is 2.93V. This is the voltage at which the device asserts a reset on the monitored supply rail.
Yes, it is ROHS3 compliant.
The output is open drain or open collector, active-low. An external pull-up resistor is required.