Analog Devices MAX6336US22D2+T, Simple Reset/Power-On Reset, Active Low, Push-Pull Output, 2.2V Threshold, 20ms Minimum Reset Timeout, -40°C to 125°C, SOT-143-4 Package.
| Parameter | Value |
|---|---|
| Type | Simple Reset/Power-On Reset |
| Mounting type | Surface Mount |
| Voltage - threshold | 2.2V |
| Number of voltages monitored | 1 |
| Operating temperature | -40°C ~ 125°C (TA) |
| Reset | Active Low |
| Output | Push-Pull, Totem Pole |
| Package | Strip |
| Reset timeout | 20ms Minimum |
| Case | TO-253-4, TO-253AA |
Housed in a SOT-143-4 surface-mount package (TO-253-4 equivalent), this part fits a standard 4-pin footprint. The push-pull output eliminates the need for an external pull-up resistor.
For dual-sourcing or a pin-compatible alternate within the same family, verify the output type matches your design before substituting.
The listed type is Simple Reset/Power-On Reset, meaning it provides a basic reset function without watchdog or manual reset input — just a clean power-on reset and brown-out detection.
The reset output is Active Low, so the output pin goes low when the supply drops below the threshold and stays low for the 20ms timeout after the supply recovers. It drives a push-pull stage, so no external pull-up is needed.