Analog Devices MAX626CSA+T low-side gate driver, N-Channel and P-Channel MOSFET, 2A peak output, 8-SOIC surface mount package, Tape & Reel.
| Parameter | Value |
|---|---|
| Gate type | N-Channel, P-Channel MOSFET |
| Input type | Inverting |
| Channel type | Independent |
| Mounting type | Surface Mount |
| Voltage | 4.5V ~ 18V |
| Logic voltage - VIL, VIH | 0.8V, 2.4V |
| Current - peak output (Source, sink) | 2A, 2A |
| Operating temperature | 0°C ~ 70°C (TA) |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| Number of drivers | 2 |
| Driven configuration | Low-Side |
| Rise (Fall time) | 25ns, 20ns |
The MAX626CSA+T is a dual low-side MOSFET gate driver from Analog Devices, configured to drive both N-Channel and P-Channel MOSFETs with an inverting input logic.
The inverting input means a logic HIGH on the input pin turns the output LOW — check the polarity against your controller's output phase before committing the BOM line.
Each channel provides 2A peak source and 2A peak sink current, with 25 ns typical rise time and 20 ns typical fall time.
The driver operates from 4.5 V to 18 V single supply.
Sourced through authorized and independent distribution channels.