Skip to main content
Analog Devices MAX6007BEUR+T — DC-DC Power Modules
Analog Devices

MAX6007BEUR+T Shunt Voltage Reference

MPNMAX6007BEUR+T
End of Life

Maxim MAX6007BEUR+T shunt voltage reference, 2.048 V fixed output, ±0.5% tolerance, 60 µVp-p noise, SOT-23-3, -40°C to 85°C.

$2.18Ref. price · indicative, final on quote
MAX6007BEUR+T datasheet
PackagingTO-236-3, SC-59, SOT-23-3
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MAX6007BEUR+T Technical Specifications
ParameterValue
Output typeFixed
Mounting typeSurface Mount
Reference typeShunt
Voltage - output (Min (Fixed))2.048V
Current - output2 mA
Current - cathode1 µA
Operating temperature-40°C ~ 85°C (TA)
PackageTape & Reel (TR); Cut Tape (CT)
Tolerance±0.5%
CaseTO-236-3, SC-59, SOT-23-3
Noise - 0.1Hz to 10Hz60µVp-p
Temperature coefficient75ppm/°C

Product details

2.048 V shunt reference in a SOT-23-3 — what it is and where it fits

The Maxim MAX6007BEUR+T is a precision shunt voltage reference delivering a fixed 2.048 V output with ±0.5% initial tolerance. Housed in a SOT-23-3 package, it operates over the -40°C to 85°C industrial temperature range. The shunt topology means it behaves like a two-terminal Zener — no separate supply pin, just a cathode and anode — so it can float at any voltage up to the breakdown, making it a natural fit for biasing ADC references, setting comparator thresholds, or providing a stable rail in isolated or battery-powered circuits where a series reference would add dropout overhead.

Cathode current and output drive — sizing the bias resistor

The MAX6007BEUR+T draws a cathode current of 1 µA minimum and can sink up to 2 mA at the output.

Active lifecycle — no LTB watch needed

The MAX6007BEUR+T carries an Active product status and is ROHS3 compliant. That means no last-time-buy clock is ticking — you can qualify it into a new BOM without worrying about an imminent EOL notice. The SOT-23-3 package is a standard footprint shared across many shunt references, so if a second-source need arises later, the board layout won't force a respin.

Frequently asked questions

What are the equivalent parts to MAX6007BEUR+T?

The MAX6007BEUR+T is a shunt reference with a fixed 2.048 V output and ±0.5% tolerance in a SOT-23-3 package. Pin-compatible alternatives from other manufacturers include the LM4040 series (2.048 V, ±0.5%) and the LT1004-2.5 (though that is 2.5 V, not 2.048 V). For a direct drop-in with the same voltage and tolerance, look for a shunt reference in SOT-23-3 with a 2.048 V fixed output and ±0.5% tolerance.

Can I replace MAX6007BEUR+T with a different voltage reference?

Yes, but only with another shunt reference of the same voltage and package. The MAX6007BEUR+T is a shunt (two-terminal) reference, not a series reference — a series reference like the MAX6033 or REF5025 has a different pinout and operating principle and cannot be swapped directly. Stick to shunt references with a 2.048 V fixed output in SOT-23-3 for a pin-compatible replacement.