What this part is and where it lands
The Maxim Integrated MAX5917AESE+ is a single-channel hot-swap controller from the Simple Swapper™ series, designed to manage inrush current and protect downstream circuitry during board insertion in live backplanes. It integrates an internal switch rated for a continuous output current of 400 mA and operates over a 10V to 65V supply range, making it a fit for 48V telecom and networking line cards where you need controlled power-up and fault isolation. The 16-SOIC package keeps the footprint compact for dense PCB layouts, and the -40°C to 85°C temperature range covers most indoor telecom and industrial equipment environments.
What the key ratings mean for your BOM
The 10V to 65V input range is the first thing to check against your backplane rail. If you're running a nominal 48V supply with transients that could dip or swell, the 65V maximum gives headroom without needing external clamping. The 400 mA output limit is the absolute ceiling for the load this controller can switch — if your line card draws more than that, you need a different part or an external FET-based hot-swap controller. The programmable UVLO lets you set the undervoltage threshold so the controller holds off until the rail is stable, which prevents partial power-up glitches on the downstream converters.
Lifecycle and sourcing reality
If you're qualifying a new design, this part has no imminent obsolescence risk.