Skip to main content
Analog Devices MAX4820EUP+ — DC-DC Power Modules
Analog Devices

MAX4820EUP+ SPI Relay Driver, 8-Channel Low-Side, 70mA

MPNMAX4820EUP+
End of Life

Maxim Integrated MAX4820EUP+, 8-channel low-side power driver, SPI interface, 2 Ohm typical Rds(on), 70mA per channel, 2.3V-5.5V load supply, 20-TSSOP-EP, -40 to 150°C.

$5.84Ref. price · indicative, final on quote
MAX4820EUP+ datasheet
Packaging20-TSSOP (0.173", 4.40mm Width) Exposed Pad
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MAX4820EUP+ Technical Specifications
ParameterValue
Output typeN-Channel
Switch typeRelay, Solenoid Driver
Mounting typeSurface Mount
Voltage - load2.3V ~ 5.5V
Current - output70mA
Number of outputs8
InterfaceSPI
Operating temperature-40°C ~ 150°C (TJ)
PackageTube
Rds on2Ohm
Case20-TSSOP (0.173\", 4.40mm Width) Exposed Pad
Output configurationLow Side
Ratio - Input:Output1:8

Product details

Eight-channel low-side driver with SPI control

The Maxim Integrated MAX4820EUP+ is an 8-channel low-side power driver for relays, solenoids, and other inductive loads. It uses an SPI interface to program the eight outputs individually. Each N-channel output sinks up to 70 mA with a typical on-resistance of 2 Ohms, in a 20-TSSOP exposed-pad package. The load supply range is 2.3 V to 5.5 V.

Temperature grade and environment

Rated for junction temperatures from -40°C to 150°C, the MAX4820EUP+ suits under-hood automotive, industrial oven controls, and outdoor telecom enclosures where ambient heat exceeds typical commercial limits. The 150°C junction ceiling gives headroom for self-heating from simultaneous channel activation in a confined board space.

Sourcing and lifecycle

The MAX4820EUP+ carries an Active product status and is ROHS3 compliant.

Frequently asked questions

What is the difference between MAX4820EUP+ and MAX4820EUP+T?

The suffix indicates the shipping medium: the MAX4820EUP+ ships in a tube, while the MAX4820EUP+T variant ships in tape-and-reel. The silicon and package are identical.

Can MAX4820EUP+ drive 12V relays?

No — the load supply range is 2.3 V to 5.5 V, so 12 V relay coils exceed the maximum rating. For 12 V loads, a driver with a higher voltage rating is needed.

Is MAX4820EUP+ compatible with 3.3V SPI?

Yes, the SPI interface operates within the 2.3 V to 5.5 V load supply range, so 3.3 V logic levels are directly compatible.

What is the typical application for MAX4820EUP+?

The MAX4820EUP+ is designed as a relay and solenoid driver for industrial automation, automotive body control modules, and any application requiring eight low-side switched outputs with SPI command.