Skip to main content
Analog Devices MAX4713ESE+ — DC-DC Power Modules
Analog Devices

MAX4713ESE+ Analog Switch IC, 25 Ohm, 4-Ch SPST, -40 to 85°C

MPNMAX4713ESE+
End of Life

Maxim Integrated MAX4713ESE+, quad SPST analog switch, 25 Ohm on-resistance, 125ns/80ns switching, single 2.7V–11V or dual ±2.7V–±5.5V supply, -40°C to +85°C, 16-SOIC.

$10.77Ref. price · indicative, final on quote
MAX4713ESE+ datasheet
Packaging16-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MAX4713ESE+ Technical Specifications
ParameterValue
Mounting typeSurface Mount
Voltage - supply, dual (V±)±2.7V ~ 5.5V
Voltage - supply, single (V+)2.7V ~ 11V
Current - leakage (IS(off))500pA
Operating temperature-40°C ~ 85°C (TA)
PackageTube
Crosstalk-87dB @ 1MHz
Case16-SOIC (0.154\", 3.90mm Width)
Switch circuitSPST - NO/NC
Charge injection25pC
Number of circuits4
On-State resistance25Ohm
Switch time (Ton, toff)125ns, 80ns
Multiplexer (Demultiplexer circuit)1:1
Channel capacitance (CS(off), CD(off))8pF, 8pF
Channel-to-Channel matching (ΔRon)200mOhm

Product details

Quad SPST analog switch with flexible supply and fast switching

Key switching performance: 25 Ohm maximum on-resistance with 200 mOhm channel-to-channel matching, 125ns turn-on and 80ns turn-off times. Off-leakage is 500 pA max, and channel capacitance is 8 pF on both source and drain sides. Charge injection is 25 pC, and crosstalk between channels is -87 dB at 1 MHz. Rated for the industrial temperature range of -40°C to +85°C, the MAX4713ESE+ is suitable for factory automation, outdoor telecom, motor drives, and data-acquisition front-ends where signal integrity over temperature matters.

25 Ohm on-resistance and channel matching — what they mean for the signal path

The 25 Ohm maximum on-resistance and 200 mOhm channel-to-channel matching keep gain errors consistent across channels in a multiplexed system. Charge injection of 25 pC is injected into the signal path each time the switch opens or closes. Crosstalk of -87 dB at 1 MHz is adequate for audio-band multiplexing and low-speed data acquisition (up to a few hundred kHz). Above 1 MHz, expect crosstalk to degrade; this part is not intended for RF or video switching.

Lifecycle and sourcing — active, no LTB risk

For new designs or BOM freeze, this part carries no near-term supply risk.

Frequently asked questions

What is the pinout of MAX4713ESE+?

Design engineers need pin configuration to validate PCB layout and ensure compatibility with their schematic.

What is the price of MAX4713ESE+?

Sourcing buyers need pricing to budget and compare costs for BOM fulfillment.

Is MAX4713ESE+ in stock at major distributors?

Buyers need immediate availability to avoid production delays; stock status drives purchasing decisions.

What is the replacement for MAX4713ESE+ if it becomes obsolete?

Maintenance techs and brokers need cross references for long-term support and last-time buy planning.

What is the on-resistance of MAX4713ESE+?

Design engineers must confirm the RON spec to ensure signal integrity and power dissipation meet application requirements.

What is the supply voltage range for MAX4713ESE+?

Engineers verifying the part can operate in their system's voltage rails, both single and dual supply.