Skip to main content
Analog Devices MAX4625EUT+T — Analog & Data Acquisition
Analog Devices

MAX4625EUT+T SPDT Analog Switch, 1 Ohm On-Resistance

MPNMAX4625EUT+T
End of Life

Maxim Integrated MAX4625EUT+T, SPDT analog switch, 1 Ohm max on-resistance, 50 ns ton/toff, -57 dB crosstalk at 1 MHz, 1.8V to 5.5V supply, SOT-23-6, -40°C to 85°C.

$4.68Ref. price · indicative, final on quote
MAX4625EUT+T datasheet
PackagingSOT-23-6
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MAX4625EUT+T Technical Specifications
ParameterValue
Mounting typeSurface Mount
Voltage - supply, single (V+)1.8V ~ 5.5V
Current - leakage (IS(off))2nA
Operating temperature-40°C ~ 85°C (TA)
PackageTape & Reel (TR); Cut Tape (CT)
Crosstalk-57dB @ 1MHz
CaseSOT-23-6
Switch circuitSPDT
Charge injection65pC
Number of circuits1
On-State resistance1Ohm
Switch time (Ton, toff)50ns, 50ns
Multiplexer (Demultiplexer circuit)2:1
Channel capacitance (CS(off), CD(off))32pF
Channel-to-Channel matching (ΔRon)60mOhm

Product details

SPDT switch with 1 Ohm on-resistance — what it means for your signal path

Switching times are 50 ns max for ton and toff. Crosstalk is -57 dB at 1 MHz. Charge injection is 65 pC, which means a small voltage glitch when the switch opens or closes. That matters if you're driving a high-impedance sample-and-hold or a precision integrator — the glitch can take microseconds to settle. For general-purpose muxing into an op-amp or ADC input, it's usually fine.

Package and temperature — fits the industrial panel

Housed in a 6-pin SOT-23 (SOT-6 supplier package), surface-mount only. The -40°C to 85°C operating range covers most factory-floor enclosures, outdoor telecom cabinets, and automotive cabin environments — not under-hood, but fine for the control board inside a motor drive or PLC. The 2 nA max off-leakage means it won't load down your signal when the channel is deselected.

Lifecycle and sourcing — active, no LTB watch

ROHS3 compliant.

Frequently asked questions

What is the on-resistance of the MAX4625EUT+T?

The maximum on-resistance is 1 Ohm. That's the worst-case figure across the full supply range and temperature; typical values are lower. Channel-to-channel matching is 60 mOhm max, so the two SPDT legs stay closely balanced.

What package does the MAX4625EUT+T come in?

It comes in a 6-pin SOT-23 package (SOT-6 supplier device package), surface-mount only. The ordering code suffix +T indicates Tape & Reel packaging; Cut Tape is also available.

What is the crosstalk of the MAX4625EUT+T?

Crosstalk is -57 dB at 1 MHz. That's the isolation between the two SPDT channels at that frequency — good enough for most audio and low-speed data muxing applications.