Skip to main content
Analog Devices MAX4514CSA+ — DC-DC Power Modules

MAX4514CSA+ SPST Analog Switch, 20 Ohm, 8-SOIC

MPNMAX4514CSA+
End of Life

Maxim MAX4514CSA+ SPST-NO analog switch, 1 circuit, 20 ohm max on-resistance, 150ns/100ns switching, 2V to 12V single supply, 8-SOIC, 0°C to 70°C.

$2.78Ref. price · indicative, final on quote
Packaging8-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MAX4514CSA+ Technical Specifications
ParameterValue
Mounting typeSurface Mount
Voltage - supply, single (V+)2V ~ 12V
Current - leakage (IS(off))1nA
Operating temperature0°C ~ 70°C (TA)
PackageTube
Case8-SOIC (0.154\", 3.90mm Width)
Switch circuitSPST - NO
Charge injection2pC
Number of circuits1
On-State resistance20Ohm
Switch time (Ton, toff)150ns, 100ns
Multiplexer (Demultiplexer circuit)1:1
Channel capacitance (CS(off), CD(off))14pF, 14pF

Product details

Single SPST switch, 20 ohm — what it handles

The Maxim MAX4514CSA+ is a single-pole single-throw normally-open analog switch in an 8-SOIC package. It passes analog or digital signals up to the supply rail with a maximum on-resistance of 20 ohms. The 150 ns turn-on and 100 ns turn-off times suit audio muxing, sample-and-hold front-ends, and general-purpose signal routing where the 0°C to 70°C commercial temperature range fits the environment.

Supply and signal range

Runs from a single 2V to 12V supply. The SPST-NO topology means the switch is open when the control pin is low; pull it high to close the channel. Charge injection is 2 pC.

Leakage and capacitance

Off-state leakage is 1 nA max, and channel capacitance is 14 pF on both source and drain. That combination keeps signal integrity clean for sub-100 kHz analog paths and for digital muxing up to a few MHz.

Package and mounting

Housed in an 8-SOIC (3.90 mm width) with surface-mount termination. The 8-SOIC footprint is standard; no surprises for the pick-and-place line.

Frequently asked questions

What is the equivalent for MAX4514CSA+?

No pin-compatible equivalent is listed in the manufacturer's cross-reference. The TS12A4514 from TI is a functionally similar SPST-NO switch in the same 8-SOIC footprint, but verify pinout and timing before substituting — the datasheet should be checked for fit.

What is the on-resistance of MAX4514CSA+?

Maximum on-resistance is 20 ohms, which is moderate — fine for audio and control signals, but not for precision analog or high-current paths.

What supply voltage does MAX4514CSA+ need?

Single supply from 2V to 12V. Works on 3.3V and 5V rails directly; also covers 12V legacy systems.