Analog Devices MAX4483AUD+ quad general-purpose op-amp, 140 kHz GBW, 0.08 V/µs slew rate, rail-to-rail output, 50 µA per channel supply, 14-TSSOP package, tube.
| Parameter | Value |
|---|---|
| Output type | Rail-to-Rail |
| Mounting type | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 1 mV |
| Voltage - supply span | 5.5 V |
| Current - supply | 50µA (x4 Channels) |
| Current - input bias | 0.1 pA |
| Current - output (Channel) | 17 mA |
| Operating temperature | -40°C ~ 125°C |
| Gain bandwidth product | 140 kHz |
| Package | Tube |
| Slew rate | 0.08V/µs |
| Case | 14-TSSOP (0.173\", 4.40mm Width) |
| Number of circuits | 4 |
The MAX4483AUD+: Each channel draws 50 µA supply current, so the full quad runs at 200 µA quiescent — a fit for multi-channel sensor front-ends where the power budget is tight. The gain-bandwidth product is 140 kHz with a 0.08 V/µs slew rate, placing it in the micropower signal-conditioning class: think thermocouple amplifiers, photodiode transimpedance stages, or battery-monitor filters where the signal bandwidth stays below a few kilohertz.
The part is active and available; any alternative would require a parametric search against the quad general-purpose op-amp class.