Maxim MAX4452EUK+T, single voltage-feedback op-amp, 200 MHz -3 dB bandwidth, 95 V/µs slew rate, rail-to-rail output, 2.7 V to 5.25 V supply, 620 µA supply current, SOT-23-5 package, -40°C to 85°C.
| Parameter | Value |
|---|---|
| Output type | Rail-to-Rail |
| Mounting type | Surface Mount |
| Amplifier type | Voltage Feedback |
| Voltage - input offset | 400 µV |
| Voltage - supply span | 5.25 V |
| Current - supply | 620µA |
| Current - input bias | 800 nA |
| Current - output (Channel) | 22 mA |
| Operating temperature | -40°C ~ 85°C |
| -3db bandwidth | 200 MHz |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Slew rate | 95V/µs |
| Case | SC-74A, SOT-753 |
| Number of circuits | 1 |
The MAX4452EUK+T carries an Active lifecycle status. ROHS3 compliance is confirmed, so it passes EU RoHS requirements as shipped.
As an active Maxim part, the MAX4452EUK+T is available through the independent distribution channel. The SOT-23-5 package is a standard footprint shared across many Maxim high-speed op-amps, so board layout carries no unusual constraints.
The MAX4451EUK+T is a dual version of the same voltage-feedback core; the MAX4452EUK+T is the single-channel variant. Both share the same 200 MHz bandwidth, 95 V/µs slew rate, and SOT-23-5 footprint. Choose the single when you need one channel in a small package; the dual when board space is tight and you need two amplifiers.
The AD8051 is also a single voltage-feedback op-amp with rail-to-rail output, but its typical supply current is higher (around 3.5 mA versus 620 µA for the MAX4452). The MAX4452EUK+T is a lower-power alternative, but verify your bandwidth and slew-rate requirements against the AD8051's datasheet specs to confirm fit. The SOT-23-5 footprint is shared, so a drop-in replacement is possible if the supply and dynamic margins align.