5 MHz GBW, 3.8 V/µs — signal bandwidth and slew-rate budget
The MAX44246ASA+T is a dual general-purpose op-amp from Analog Devices, in an 8-SOIC package. Its 5 MHz gain-bandwidth product and 3.8 V/µs slew rate suit it for signal-conditioning stages that need a few hundred kHz of closed-loop bandwidth — think sensor amplification, active filters, or ADC driver buffers where the input signal changes faster than a low-power amp can track.
1 µV offset, rail-to-rail output — precision without the trim pot
Input offset voltage is 1 µV typical — low enough that a precision DC front-end can skip the external nulling resistor. Supply span from 2.7 V to 36 V means the same part works in a battery-powered 3 V system or an industrial 24 V control loop without a separate regulator.
420 µA per channel, 40 mA output — low-power drive for ADC inputs or cables
Each amplifier draws 420 µA supply current, yet can deliver 40 mA output current — enough to drive a 100-ohm load or the sampling capacitor of a successive-approximation ADC without an external buffer. The 300 pA input bias current keeps DC errors low when the source impedance is in the tens of kΩ range.
ROHS3 compliant per the manufacturer.