5 MHz gain-bandwidth, 1.8V/µs slew rate
The MAX4337EUA+ is a dual-channel general-purpose op-amp from Analog Devices with a 5 MHz gain-bandwidth product and a 1.8V/µs slew rate. This combination means the amplifier can handle signals up to roughly 800 kHz at unity gain before the slew rate limits the large-signal response — useful for conditioning sensor outputs or driving ADC inputs in the audio and low-frequency instrumentation band.
Supply current and output drive
Each channel draws 1.3 mA supply current, keeping the total quiescent draw for both amplifiers at 2.6 mA — a reasonable budget for a multi-stage signal chain on a 5 V rail. Input bias current is 100 nA typical and input offset voltage is 600 µV — figures that suit general-purpose conditioning of signals from resistive sensors (thermistors, strain gauges) where the source impedance is in the low-kΩ range. For higher-impedance sources, the bias current may introduce a noticeable voltage drop across the source resistance.
Housed in an 8-TSSOP or 8-MSOP package (3.00 mm width), the MAX4337EUA+ uses the supplier device package 8-uMAX/uSOP.