Skip to main content
Analog Devices MAX4326ESA+ — Discrete Semiconductors
Analog Devices

MAX4326ESA+ Analog Devices Dual Op-Amp, 5 MHz, 2 V/µs

MPNMAX4326ESA+
End of Life

Analog Devices MAX4326ESA+ dual general-purpose op-amp, 5 MHz gain-bandwidth, 2 V/µs slew rate, rail-to-rail output, 8-SOIC surface-mount package, tube.

$3.61Ref. price · indicative, final on quote
Packaging8-SOIC (0.154", 3.90mm Width)
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MAX4326ESA+ Technical Specifications
ParameterValue
Output typeRail-to-Rail
Mounting typeSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset700 µV
Voltage - supply span6.5 V
Current - supply725µA (x2 Channels)
Current - input bias50 nA
Current - output (Channel)50 mA
Operating temperature-40°C ~ 85°C
Gain bandwidth product5 MHz
PackageTube
Slew rate2V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits2

Product details

Parametric fit for a two-channel signal chain

The MAX4326ESA+: Rail-to-rail output swing lets each channel drive an ADC input or a downstream stage without losing headroom at the 2.4 V minimum supply rail. Supply current is 725 µA for both channels — a 5 MHz part drawing under 0.4 mA per amplifier leaves thermal headroom in a dense board and suits battery-powered instrumentation.

The tube packaging is the factory-standard delivery for low-volume SOIC-8 — no reel fee, straight into a JEDEC tray or tube feeder for prototype and small-batch assembly.

Frequently asked questions

What is the input bias current and why does it matter?

Input bias current is 50 nA typical. For a 10 kΩ source impedance the voltage error is 500 µV — negligible in a 5 MHz bandwidth but worth derating if the source impedance exceeds 100 kΩ.

What compliance documentation does Analog Devices provide for MAX4326ESA+?

ROHS3 compliance is declared. No UL or IEC certification is listed for this general-purpose op-amp; the standard ADI material compliance declaration covers REACH and conflict minerals per the current product revision.