The MAX4282ESA+: ROHS3 compliant — no exemption-based lead content, which simplifies the compliance declaration for EU and UKCA markets.
Parametric fit for signal-conditioning chains
Two circuits in one 8-SOIC package, each drawing 320 µA supply current — the per-channel quiescent is low enough that a 5 V rail can power both amplifiers without exceeding the thermal budget of the narrow-body SOIC at 85 °C ambient. Rail-to-rail output swing lets it drive the full 0–5 V range into a 65 mA load without headroom loss, useful for single-supply ADC front-ends or low-voltage sensor interfaces. Input bias current of 50 pA and input offset voltage of 500 µV are typical for a general-purpose bipolar-input stage — the bias current is low enough that a 10 kΩ source resistor contributes only 0.5 µV of additional offset, negligible in most signal paths.
8-SOIC (0.154-inch body width, 3.90 mm) — the standard narrow-body SOIC footprint that places without tombstoning risk on a typical lead-free reflow profile. The tube delivery means the parts arrive in a rigid antistatic tube, not tape-and-reel; plan for manual or tube-fed placement if the pick-and-place feeder supports SOIC tubes.