Skip to main content
Analog Devices MAX4209HAUA+ — Memory (DRAM / SRAM / Flash / EEPROM)
Analog Devices

MAX4209HAUA+ Instrumentation Amplifier, 750 kHz GBW

MPNMAX4209HAUA+
End of Life

Analog Devices MAX4209HAUA+, single instrumentation amplifier, 750 kHz GBW, 7.5 kHz -3 dB bandwidth, 3 µV offset, rail-to-rail output, 8-uMAX/uSOP package, -40 to 125°C.

$4.69Ref. price · indicative, final on quote
MAX4209HAUA+ datasheet
Packaging8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MAX4209HAUA+ Technical Specifications
ParameterValue
Output typeRail-to-Rail
Mounting typeSurface Mount
Amplifier typeInstrumentation
Voltage - input offset3 µV
Voltage - supply span2.85 V
Current - supply1.4mA
Current - input bias1 pA
Current - output (Channel)25 mA
Operating temperature-40°C ~ 125°C
-3db bandwidth7.5 kHz
Gain bandwidth product750 kHz
PackageTube
Slew rate0.055V/µs
Case8-TSSOP, 8-MSOP (0.118\", 3.00mm Width)
Number of circuits1

Product details

Precision instrumentation amp for bridge and thermocouple front-ends

The MAX4209HAUA+ is a single-supply instrumentation amplifier from Analog Devices, built for precision low-frequency measurement. Its 3 µV input offset voltage and 1 pA input bias current let it interface directly with strain-gauge bridges, thermocouples, and other high-impedance sensors without an external buffer stage. The rail-to-rail output swings within millivolts of the supply rails, maximizing ADC dynamic range on a 2.85 V to 5.5 V supply. The -40°C to 125°C temperature range covers industrial and automotive under-hood environments, and the 8-uMAX/uSOP package fits tight mixed-signal layouts.

Active production, no LTB watch needed

The MAX4209HAUA+ carries an active lifecycle status and ROHS3 compliance. No end-of-life notice or last-time-buy window is documented.

Package and pinout — 8-uMAX/uSOP

The part ships in a Tube, 8-lead uMAX/uSOP package (3.00 mm body width, 0.118" pitch). Surface-mount only.

Frequently asked questions

What is the gain bandwidth product of MAX4209HAUA+?

The gain-bandwidth product is 750 kHz, with a -3 dB bandwidth of 7.5 kHz. This supports gains up to 100 for low-frequency precision measurements.

Is MAX4209HAUA+ equivalent to INA333?

Both are single-supply instrumentation amplifiers in similar packages, but the MAX4209HAUA+ has a 3 µV offset versus the INA333's 25 µV typical. Pin compatibility depends on the specific reference and gain-set architecture — verify the pinout against your layout before substituting.

What is the pinout of MAX4209HAUA+?

The MAX4209HAUA+ uses the standard 8-pin uMAX/uSOP instrumentation amplifier pinout. The exact pin functions are detailed in the datasheet; the reference pin sets the output common-mode level for single-supply designs.