Skip to main content
Analog Devices MAX4042EUA+ — Memory (DRAM / SRAM / Flash / EEPROM)
Analog Devices

MAX4042EUA+ Dual Rail-to-Rail Op-Amp, 90 kHz, 0.04 V/µs

MPNMAX4042EUA+
End of Life

Analog Devices MAX4042EUA+, dual general-purpose op-amp, rail-to-rail output, 90 kHz gain bandwidth, 0.04 V/µs slew rate, 2.4 V to 5.5 V supply, 14 µA per channel, 8-uMAX/uSOP surface-mount package, -40°C to 85°C.

$3.42Ref. price · indicative, final on quote
MAX4042EUA+ datasheet
Packaging8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MAX4042EUA+ Technical Specifications
ParameterValue
Output typeRail-to-Rail
Mounting typeSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset250 µV
Voltage - supply span5.5 V
Current - supply14µA (x2 Channels)
Current - input bias2 nA
Current - output (Channel)2.5 mA
Operating temperature-40°C ~ 85°C
Gain bandwidth product90 kHz
PackageTube
Slew rate0.04V/µs
Case8-TSSOP, 8-MSOP (0.118\", 3.00mm Width)
Number of circuits2

Product details

The Analog Devices MAX4042EUA+ is a dual general-purpose op-amp with rail-to-rail output, built for low-power signal conditioning in battery-powered or loop-powered systems. It draws 14 µA per channel, runs on a 2.4 V to 5.5 V supply span, and delivers 90 kHz gain-bandwidth product with a 0.04 V/µs slew rate — enough for DC and low-frequency sensor signals, thermocouple amplifiers, or battery-monitor front-ends. The 8-uMAX/uSOP package keeps board area tight, and the -40°C to 85°C range covers industrial and outdoor telecom enclosures.

Lifecycle and sourcing

The MAX4042EUA+ is listed as Active with ROHS3 compliance. No end-of-life notice, no last-time-buy window — it is a current-production part you can specify into a new BOM without worrying about a forced redesign. Sourced and quoted to order through independent distribution; availability and current pricing confirmed at quote time against an RFQ.

Frequently asked questions

Is MAX4042EUA+ rail-to-rail?

Yes, the output type is rail-to-rail, allowing the output to swing close to both supply rails — useful for single-supply designs and ADC interfaces.

What is the bandwidth of MAX4042EUA+?

The gain-bandwidth product is 90 kHz, and the slew rate is 0.04 V/µs — suited for DC and low-frequency signal conditioning.

What is an equivalent part for MAX4042EUA+?

Within the same family, the single-channel MAX4040 and quad-channel MAX4044 share the same 90 kHz GBW, 14 µA supply, and rail-to-rail output — pinout differs by channel count, not footprint.