Skip to main content
Analog Devices MAX3488EPA+ — Analog & Data Acquisition
Analog Devices

MAX3488EPA+ RS-422/RS-485 Transceiver, Full Duplex, 250 kbps

MPNMAX3488EPA+
End of Life

Maxim Integrated MAX3488EPA+, RS-422/RS-485 transceiver, full duplex, 1 driver / 1 receiver, 250 kbps, 3V–3.6V supply, -40°C to +85°C, 8-PDIP.

$8.56Ref. price · indicative, final on quote
MAX3488EPA+ datasheet
Packaging8-DIP (0.300", 7.62mm)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MAX3488EPA+ Technical Specifications
ParameterValue
TypeTransceiver
Mounting typeThrough Hole
Voltage3V ~ 3.6V
ProtocolRS422, RS485
Operating temperature-40°C ~ 85°C
DuplexFull
PackageTube
Data rate250kbps
Case8-DIP (0.300\", 7.62mm)
Receiver hysteresis50 mV
Number of drivers (Receivers)1/1

Product details

Through-hole package — field-service friendly

The 8-DIP package (0.300" body, 7.62 mm pitch) is a socketable, hand-solderable part. If you are maintaining legacy PLC or SCADA panels, this is the kind of transceiver you can swap on site with a basic iron and a solder sucker — no hot-air station, no reflow profile. The 50 mV of receiver hysteresis helps reject noise on an idle bus, which is a real help when you are troubleshooting a flaky line without a scope handy.

Lifecycle and sourcing

Maxim lists the MAX3488EPA+ as Active and ROHS3 compliant.

Frequently asked questions

Is MAX3488EPA+ the correct replacement for MAX3488ESA+ in through-hole designs?

Yes — the MAX3488EPA+ is the through-hole (PDIP) version of the same transceiver core. The MAX3488ESA+ is the surface-mount (SOIC) variant. Electrically identical; the EPA+ swaps into a DIP socket footprint.

Can MAX3488EPA+ operate with a 3.0V supply and at 250 kbps over long RS-485 cable runs?

Yes. The supply range is 3V to 3.6V, so 3.0V is within spec. The 250 kbps data rate is deliberately chosen for robust signal integrity over long cable runs — the slower edge rate reduces reflections and EMI on extended RS-485 buses.

Is MAX3488EPA+ compatible with 3.3V systems?

Yes — the 3V to 3.6V supply range covers 3.3V nominal. It is a direct fit for 3.3V logic and bus rails.