Skip to main content
Analog Devices MAX3088ECPA+ — DC-DC Power Modules
Analog Devices

MAX3088ECPA+ RS-485/RS-422 Transceiver, 10 Mbps, 8-PDIP

MPNMAX3088ECPA+
End of Life

Maxim Integrated MAX3088ECPA+, half-duplex RS-485/RS-422 transceiver, 1/1 driver/receiver, 10 Mbps data rate, 100 mV receiver hysteresis, 4.75~5.25 V supply, 0°C~70°C, 8-PDIP.

$6.32Ref. price · indicative, final on quote
MAX3088ECPA+ datasheet
Packaging8-DIP (0.300", 7.62mm)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MAX3088ECPA+ Technical Specifications
ParameterValue
TypeTransceiver
Mounting typeThrough Hole
Voltage4.75V ~ 5.25V
ProtocolRS422, RS485
Operating temperature0°C ~ 70°C
DuplexHalf
PackageTube
Data rate10Mbps
Case8-DIP (0.300\", 7.62mm)
Receiver hysteresis100 mV
Number of drivers (Receivers)1/1

Product details

RS-485/RS-422 transceiver for 5 V industrial links

The Maxim Integrated MAX3088ECPA+ is a half-duplex transceiver on the RS-485 and RS-422 protocol, packing one driver and one receiver into an 8-pin PDIP package. It handles data rates up to 10 Mbps, with 100 mV of receiver hysteresis to reject line noise on long cable runs. Supply range is 4.75 V to 5.25 V, and the operating temperature covers 0°C to 70°C — the commercial grade, suited for indoor industrial control, building automation panels, and test equipment where the ambient stays inside that range.

Active production — no LTB watch needed

The MAX3088ECPA+ carries an Active lifecycle status. ROHS3 compliant.

Frequently asked questions

Is MAX3088ECPA+ a direct replacement for MAX3082ECPA?

Both are half-duplex RS-485/RS-422 transceivers in the same 8-PDIP footprint and 5 V supply range. The key difference is data rate: the MAX3088ECPA+ runs at 10 Mbps, while the MAX3082ECPA is typically a lower-speed part (often 250 kbps or 1 Mbps depending on the variant). If your bus timing budget supports the higher speed, the MAX3088ECPA+ is pin-compatible and can drop in — but confirm the receiver hysteresis and fail-safe behavior against your specific network requirements.