Skip to main content
Analog Devices MAX3079EESD+ — Memory (DRAM / SRAM / Flash / EEPROM)
Analog Devices

MAX3079EESD+ Transceiver, RS422/RS485, 16Mbps, 14-SOIC

MPNMAX3079EESD+
End of Life

Analog Devices MAX3079EESD+, Transceiver, Full Duplex, 1/1 Drivers/Receivers, RS422/RS485, 16Mbps, 3V-3.6V, -40°C to 85°C, 14-SOIC.

$7.0Ref. price · indicative, final on quote
MAX3079EESD+ datasheet
Packaging14-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MAX3079EESD+ Technical Specifications
ParameterValue
TypeTransceiver
Mounting typeSurface Mount
Voltage3V ~ 3.6V
ProtocolRS422, RS485
Operating temperature-40°C ~ 85°C
DuplexFull
PackageTube
Data rate16Mbps
Case14-SOIC (0.154\", 3.90mm Width)
Receiver hysteresis100 mV
Number of drivers (Receivers)1/1

Product details

RS-422/RS-485 transceiver at 16 Mbps — fit for the differential bus

The MAX3079EESD+ is a full-duplex transceiver for RS-422 and RS-485 networks, with one driver and one receiver in a 14-SOIC package.

What the ratings mean for the BOM

Full-duplex operation allows simultaneous transmit and receive over a four-wire bus. The 16 Mbps data rate supports cable runs up to several hundred feet at lower speeds.

Package and mounting

Surface-mount in a 14-SOIC (3.90 mm body width). Standard footprint, compatible with most pick-and-place lines. No special thermal pad or exposed die — just a straightforward SOIC reflow profile.

Frequently asked questions

What is the difference between MAX3079EESD+ and MAX3079EESD+T?

The suffix difference is packaging: the + indicates tube packaging, while +T indicates tape-and-reel. The silicon and electrical specs are identical.

Can MAX3079EESD+ replace MAX3485?

The MAX3079EESD+ is a full-duplex part, while the MAX3485 is half-duplex. They are not pin-compatible — the MAX3079 uses a different pinout for the extra driver/receiver pair. Replacing a MAX3485 with this part requires a board redesign.

What is MAX3079EESD+'s listed type and duplex?

It is a Transceiver with Full Duplex operation, supporting one driver and one receiver.