Skip to main content
Analog Devices MAX3059ASA+ — DC-DC Power Modules
Analog Devices

MAX3059ASA+ CAN Transceiver, 1 Mbps, Full Duplex, 8-SOIC

MPNMAX3059ASA+
End of Life

Analog Devices MAX3059ASA+ CAN transceiver, full duplex, 1 Mbps data rate, 4.5V to 5.5V supply, -40°C to 125°C, 8-SOIC package.

$2.68Ref. price · indicative, final on quote
MAX3059ASA+ datasheet
Packaging8-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MAX3059ASA+ Technical Specifications
ParameterValue
TypeTransceiver
Mounting typeSurface Mount
Voltage4.5V ~ 5.5V
ProtocolCANbus
Operating temperature-40°C ~ 125°C
DuplexFull
PackageTube
Data rate1Mbps
Case8-SOIC (0.154\", 3.90mm Width)
Receiver hysteresis100 mV
Number of drivers (Receivers)1/1

Product details

What the MAX3059ASA+ is and where it fits

The MAX3059ASA+ from Analog Devices is a single-channel CAN transceiver in an 8-SOIC package. It handles the physical-layer conversion between a CAN controller and the differential bus, operating at a standard data rate of 1 Mbps with full-duplex capability. The part is specified across the -40°C to 125°C temperature range, making it suitable for industrial automation, motor drives, and automotive under-hood nodes where the bus must survive under-hood heat and vibration.

Lifecycle and sourcing reality

The MAX3059ASA+ is listed as Active in production with ROHS3 compliance. No end-of-life notification or last-time-buy window is in effect, so the part is safe to specify for new designs and production builds.

Frequently asked questions

Can MAX3059ASA+ replace MCP2551?

Both are 5V CAN transceivers in 8-SOIC packages, but the MAX3059ASA+ is full duplex while the MCP2551 is half duplex. A direct drop-in replacement is not possible if the design relies on half-duplex bus arbitration. Check the controller's CAN interface requirements before substituting.

Does MAX3059ASA+ support CAN FD protocol?

No. The MAX3059ASA+ is a CAN 2.0 transceiver with a maximum data rate of 1 Mbps. It does not support the higher data rates of CAN FD (Flexible Data-Rate).

Is MAX3059ASA+ compatible with CAN 2.0?

Yes, the 1 Mbps data rate and 5V supply are standard for CAN 2.0 networks. The part is designed for CAN 2.0 physical-layer applications.