Skip to main content
Analog Devices MAX1795EUA+T — DC-DC Power Modules
Analog Devices

MAX1795EUA+T Boost Converter, 500kHz, 200mA, 8-uMAX/uSOP

MPNMAX1795EUA+T
End of Life

Analog Devices MAX1795EUA+T, Step-Up Boost Converter, Adjustable Output, 200mA Switch, 500kHz, 8-uMAX/uSOP, -40°C to 85°C, Active.

$9.83Ref. price · indicative, final on quote
MAX1795EUA+T datasheet
Packaging8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MAX1795EUA+T Technical Specifications
ParameterValue
Output typeAdjustable (Programmable)
Mounting typeSurface Mount
Voltage - input5.5V
Voltage - output5.5V
Voltage - output (Min (Fixed))2V (3.3V, 5V)
Current - output200mA (Switch)
Frequency500kHz
Number of outputs1
Operating temperature-40°C ~ 85°C (TA)
PackageTape & Reel (TR); Cut Tape (CT)
FunctionStep-Up
TopologyBoost
Case8-TSSOP, 8-MSOP (0.118\", 3.00mm Width)
Output configurationPositive
Synchronous rectifierYes

Product details

What this boost converter does for your rail

The MAX1795EUA+T is a step-up (boost) DC-DC converter from Analog Devices, built for generating a regulated positive rail from a lower input voltage. It starts up from as low as 1 V on the input, which means it can draw from a single alkaline cell or a Li-ion battery that's nearly flat, and deliver a programmable output from 2 V up to 5.5 V. The internal switch is rated for 200 mA, so this is a light-load part — think sensor supplies, Bluetooth modules, or small MCU rails — not a motor driver. Switching at 500 kHz keeps the inductor small, which helps when board space is tight.

Output voltage options and setting

The output is adjustable, with factory-programmed fixed options at 3.3 V and 5 V available through the same part number variant.

Temperature range and environment

Rated for -40°C to 85°C ambient, which covers industrial control cabinets, outdoor telecom enclosures, and automotive cabin environments. Not a full automotive-grade part (no AEC-Q100 listed), but fine for most commercial and industrial applications where the board isn't under the hood.

Lifecycle and sourcing

This part is listed as Active with ROHS3 compliance. If you're stocking spares for a long-life product, this one isn't going away soon.

Frequently asked questions

Is MAX1795EUA+T compatible with 3.3V input?

Yes. The input range is 1 V to 5.5 V, so a 3.3 V rail is well within the operating window. The part will boost a 3.3 V input to a higher output if needed, or you can use the fixed 3.3 V output option if you're just regulating a 3.3 V rail from a lower source.

What is an equivalent replacement for MAX1795EUA+T?

Within the same family, the MAX1795 is pin-compatible with other members of the MAX1795/MAX1796/MAX1797 series. The closest functional equivalent shares the same 8-uMAX/uSOP footprint and 500 kHz switching frequency, but output current and fixed-voltage options vary by suffix. Check the specific output current and voltage option you need before substituting.