Analog Devices MAX1793EUE25+T, positive LDO voltage regulator, 1A output, adjustable (1.25V min) or fixed 2.5V, 0.45V dropout max at 1A, 200 µA quiescent current, 16-TSSOP exposed pad, -40°C to 85°C.
| Parameter | Value |
|---|---|
| Output type | Adjustable (Fixed) |
| Mounting type | Surface Mount |
| Voltage - input | 5.5V |
| Voltage dropout | 0.45V @ 1A |
| Voltage - output | 5V |
| Voltage - output (Min (Fixed)) | 1.25V (2.5V) |
| Current - output | 1A |
| Current - quiescent | 200 µA |
| Operating temperature | -40°C ~ 85°C (TA) |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Case | 16-TSSOP (0.173\", 4.40mm Width) Exposed Pad |
| Control features | Enable, Reset |
| Protection features | Over Current, Over Temperature, Short Circuit |
| Number of regulators | 1 |
| Output configuration | Positive |
Built-in over-current, over-temperature, and short-circuit protection mean this part survives a downstream fault without latching or smoking. The Enable and Reset control pins let a supervisor or MCU sequence the rail — useful for multi-rail power-up schemes where the core voltage must stabilise before I/O comes up.
The MAX1793EUE25+T carries an Active lifecycle status and is ROHS3 compliant.
The MAX1793EUE25+T is rated for 1A continuous output current.
The output is configurable: adjustable down to 1.25V minimum, or fixed at 2.5V.