Skip to main content
Analog Devices MAX1693HEUB+T — DC-DC Power Modules
Analog Devices

MAX1693HEUB+T USB Power Switch, 60mOhm, 700mA, 10-uMAX

MPNMAX1693HEUB+T
End of Life

Maxim Integrated MAX1693HEUB+T, USB Power Switch, P-Channel, High Side, 1 Output, 60mOhm, 700mA, 2.7V to 5.5V, 10-uMAX/uSOP, -40°C to +85°C.

$2.74Ref. price · indicative, final on quote
MAX1693HEUB+T datasheet
Packaging10-TFSOP, 10-MSOP (0.118", 3.00mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MAX1693HEUB+T Technical Specifications
ParameterValue
Input typeNon-Inverting
Output typeP-Channel
Switch typeUSB Switch
Mounting typeSurface Mount
Voltage - load2.7V ~ 5.5V
Voltage - supply (Vcc (Vdd))Not Required
Current - output700mA
Number of outputs1
InterfaceOn/Off
Operating temperature-40°C ~ 85°C (TA)
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesStatus Flag
Rds on60mOhm
Case10-TFSOP, 10-MSOP (0.118\", 3.00mm Width)
Fault protectionCurrent Limiting (Fixed), Over Temperature
Output configurationHigh Side
Ratio - Input:Output1:1

Product details

USB high-side switch with fault protection

The Maxim Integrated MAX1693HEUB+T is a single-channel, high-side P-channel USB power switch in a 10-uMAX/uSOP package. It provides a fixed current limit of 700 mA, a typical Rds(on) of 60 mOhm, and operates from a 2.7 V to 5.5 V supply. The switch includes over-temperature and current-limiting fault protection, plus a status flag output to signal fault conditions. The on/off interface is non-inverting, and no external Vcc supply is needed — the load voltage powers the internal gate drive.

Package and storage notes

The device comes in a 10-pin TFSOP/MSOP (3.00 mm width) body, designated as 10-uMAX/uSOP by Maxim. Cut Tape is also available.

Lifecycle and sourcing

The MAX1693HEUB+T carries an Active lifecycle status with ROHS3 compliance.

Frequently asked questions

What is the Rds(on) of MAX1693HEUB+T?

The typical Rds(on) is 60 mOhm. At 700 mA output that yields about 42 mV drop across the switch.

Can MAX1693HEUB+T be used for USB 2.0?

Yes — the 700 mA output and 60 mOhm Rds(on) keep the voltage drop low enough to meet USB 2.0's 4.4 V minimum at the device end from a 5 V bus. The fixed current limit also provides the required over-current protection.