Skip to main content
Analog Devices MAX15054AUT+T — Analog & Data Acquisition
Analog Devices

MAX15054AUT+T High-Side N-Channel MOSFET Gate Driver

MPNMAX15054AUT+T
End of Life

Maxim Integrated MAX15054AUT+T, high-side N-Channel MOSFET gate driver, single channel, non-inverting, 4.6V to 5.5V supply, 2.5A peak source/sink, 65V bootstrap, 18ns/16ns rise/fall, SOT-23-6, -40°C to 150°C.

$2.94Ref. price · indicative, final on quote
MAX15054AUT+T datasheet
PackagingSOT-23-6
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MAX15054AUT+T Technical Specifications
ParameterValue
Gate typeN-Channel MOSFET
Input typeNon-Inverting
Channel typeSingle
Mounting typeSurface Mount
Voltage4.6V ~ 5.5V
Logic voltage - VIL, VIH1.8V, 3.9V
High side voltage - max (Bootstrap)65 V
Current - peak output (Source, sink)2.5A, 2.5A
Operating temperature-40°C ~ 150°C (TJ)
PackageTape & Reel (TR); Cut Tape (CT)
CaseSOT-23-6
Number of drivers1
Driven configurationHigh-Side
Rise (Fall time)18ns, 16ns

Product details

Temperature grade and deployment environment

Rated for continuous junction temperature from -40°C to 150°C, this driver is qualified for the full automotive temperature range. The SOT-23-6 package with exposed pad requires careful PCB thermal design.

Lifecycle and sourcing posture

The MAX15054AUT+T carries an Active product status with ROHS3 compliance. No official second-source or pin-compatible alternate is listed in the available records, so BOM qualification should be based on this single source for now.

Frequently asked questions

Can the MAX15054AUT+T drive a 12V N-channel MOSFET?

Yes. The driver's 65V maximum bootstrap voltage allows it to generate a gate drive voltage above a 12V bus rail. The 2.5A peak source current can drive the gate charge of most 12V-rated N-channel MOSFETs at switching frequencies up to several hundred kHz, provided the total gate charge does not exceed the driver's capability at the target frequency.

Does the MAX15054AUT+T support 3.3V logic input?

No. The input logic high threshold (VIH) is 3.9V minimum, so a standard 3.3V logic output (typically 3.0V to 3.3V) will not reliably drive the input high. A 5V logic signal or a level translator is required.

What logic levels does the MAX15054AUT+T support?

The input accepts logic-low signals up to 1.8V (VIL) and requires logic-high signals of at least 3.9V (VIH). This is compatible with 5V CMOS and TTL logic families, but not with 3.3V logic without level shifting.

Can the MAX15054AUT+T be used with a bootstrap supply?

Yes, the driver is designed for bootstrap operation. The high-side voltage (bootstrap) is rated to a maximum of 65V. A bootstrap diode and capacitor are required external to the driver to generate the floating gate drive supply above the switching node voltage.