Skip to main content
Analog Devices MAX1486EUB+T — Discrete Semiconductors
Analog Devices

MAX1486EUB+T RS422/RS485 Transceiver, Full Duplex, 12Mbps

MPNMAX1486EUB+T
End of Life

Maxim Integrated MAX1486EUB+T, RS422/RS485 Transceiver, Full Duplex, 1/1 Drivers/Receivers, 12Mbps, 4.75V~5.25V, -40°C~85°C, 10-uMAX/uSOP.

$5.89Ref. price · indicative, final on quote
MAX1486EUB+T datasheet
Packaging10-TFSOP, 10-MSOP (0.118", 3.00mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MAX1486EUB+T Technical Specifications
ParameterValue
TypeTransceiver
Mounting typeSurface Mount
Voltage4.75V ~ 5.25V
ProtocolRS422, RS485
Operating temperature-40°C ~ 85°C
DuplexFull
PackageTape & Reel (TR); Cut Tape (CT)
Data rate12Mbps
Case10-TFSOP, 10-MSOP (0.118\", 3.00mm Width)
Receiver hysteresis70 mV
Number of drivers (Receivers)1/1

Product details

12 Mbps and 70 mV hysteresis — what they mean for the bus

At 12 Mbps the MAX1486EUB+T can sustain full-duplex throughput on short cable runs without bit errors. On longer runs the practical data rate drops, but the 70 mV hysteresis keeps the receiver from toggling on reflections or common-mode noise.

Industrial temperature and active lifecycle

Rated for -40°C to 85°C, the MAX1486EUB+T is suited for unheated enclosures, motor-drive cabinets, and outdoor telecom pedestals where the ambient can swing. The part carries an Active lifecycle status — no last-time-buy notice, no NRND flag. That means it is a stable line item for a BOM freeze: no forced redesign from an EOL pull.

Frequently asked questions

Is MAX1486EUB+T compatible with RS422?

Yes, the MAX1486EUB+T is listed as an RS422 and RS485 transceiver. It supports full-duplex communication on both standards.

What is the difference between MAX1486EUB+T and MAX1487EUB+T?

The MAX1486EUB+T is a full-duplex transceiver; the MAX1487EUB+T is half-duplex. Both run at 12 Mbps and share the same 5V supply and industrial temperature range, but the duplex mode changes the bus wiring — full duplex requires two twisted pairs, half duplex uses one.