Skip to main content
Analog Devices MAX1232ESA+T — Analog & Data Acquisition
Analog Devices

MAX1232ESA+T Simple Reset/Power-On Reset, 250ms Timeout

MPNMAX1232ESA+T
End of Life

Maxim Integrated MAX1232ESA+T, Simple Reset/Power-On Reset supervisor, Active High/Active Low reset, Open Drain output, 250ms minimum reset timeout, 4.37V/4.62V thresholds, -40°C to 85°C, 8-SOIC surface mount.

$4.39Ref. price · indicative, final on quote
MAX1232ESA+T datasheet
Packaging8-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MAX1232ESA+T Technical Specifications
ParameterValue
TypeSimple Reset/Power-On Reset
Mounting typeSurface Mount
Voltage - threshold4.37V, 4.62V
Number of voltages monitored1
Operating temperature-40°C ~ 85°C (TA)
ResetActive High/Active Low
OutputOpen Drain or Open Collector
PackageTape & Reel (TR); Cut Tape (CT)
Reset timeout250ms Minimum
Case8-SOIC (0.154\", 3.90mm Width)

Product details

What this supervisor does on your board

The Maxim Integrated MAX1232ESA+T is a single-channel Simple Reset/Power-On Reset supervisor in an 8-SOIC package. It monitors a single voltage rail and asserts a reset signal — either active-high or active-low — when the supply drops below the programmed threshold. The output is open-drain, so you choose the pull-up voltage and logic family. The reset timeout is a minimum of 250 ms, long enough for most MCUs and SoCs to complete their initialization sequence before the supervisor releases the reset line.

Threshold selection and supply compatibility

Two factory-set voltage thresholds are available: 4.37 V and 4.62 V. These are the trip points at which the reset asserts when the monitored rail falls below the selected value.

Lifecycle and sourcing

The MAX1232ESA+T is listed as Active with ROHS3 compliance. There is no end-of-life notice or last-time-buy schedule.

Frequently asked questions

Does MAX1232ESA+T work with 5V and 3.3V supplies?

The MAX1232ESA+T monitors a single voltage rail with thresholds of 4.37 V and 4.62 V, which are intended for 5 V nominal supplies. It is not designed for 3.3 V rails — the thresholds are too high to provide useful supervision on a 3.3 V bus.