Skip to main content
Analog Devices LTC6256IMS#PBF — Logic ICs
Analog Devices

LTC6256IMS#PBF Dual Op-Amp, 6.5 MHz, Rail-to-Rail

MPNLTC6256IMS#PBF
End of Life

Linear Technology LTC6256IMS#PBF, dual general-purpose op-amp, 6.5 MHz GBP, 1.8 V/µs slew rate, rail-to-rail output, 65 µA per channel, 1.8 V to 5.25 V supply, 10-MSOP, -40°C to 85°C.

$6.83Ref. price · indicative, final on quote
LTC6256IMS#PBF datasheet
Packaging10-TFSOP, 10-MSOP (0.118", 3.00mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

LTC6256IMS#PBF Technical Specifications
ParameterValue
Output typeRail-to-Rail
Mounting typeSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset100 µV
Voltage - supply span5.25 V
Current - supply65µA (x2 Channels)
Current - input bias5 nA
Current - output (Channel)35 mA
Operating temperature-40°C ~ 85°C
-3db bandwidth4.5 MHz
Gain bandwidth product6.5 MHz
PackageTube
Slew rate1.8V/µs
Case10-TFSOP, 10-MSOP (0.118\", 3.00mm Width)
Number of circuits2

Product details

What this dual op-amp does on your board

The LTC6256IMS#PBF from Linear Technology is a dual-channel general-purpose operational amplifier built for signal conditioning in power-sensitive industrial and portable gear. Each channel draws 65 µA of supply current while delivering a 6.5 MHz gain-bandwidth product and a 1.8 V/µs slew rate, which keeps the loop stable for filtering and buffering up through the low-MHz range.

Package and mounting notes for the BOM

Surface-mount only; the MSOP footprint is standard, but the narrow body means careful solder-paste stencil alignment for consistent fillets. ROHS3 compliant per, so no exemption-based restrictions on your compliance declaration.

If your design lives in a heated control room or lab instrument, the commercial tail of this grade is fine; for a motor-drive panel that sees afternoon sun, the -40°C floor gives you cold-start margin on the amplifier bias.

Lifecycle status — still in production

The official product status is Active per, and the part carries ROHS3 compliance.

Frequently asked questions

Is LTC6256IMS#PBF RoHS compliant?

Yes — it is listed as ROHS3 Compliant per, which means it meets the EU RoHS directive without any of the exempted substance categories.

What is the LTC6256IMS#PBF's slew rate and bandwidth?

Slew rate is 1.8 V/µs, gain-bandwidth product is 6.5 MHz, and the -3 dB bandwidth is 4.5 MHz. That combination handles audio-frequency filtering, sensor buffering, and control-loop compensation up to a few hundred kHz without slew-induced distortion, but it will not drive a high-speed ADC input at 10 Msps — the 35 mA output current per channel limits the capacitive drive capability at higher frequencies.