Dual 720 MHz op-amp with 280V/µs slew rate — what it buys you
That combination targets signal paths where preserving edge fidelity matters — think ADC front-end drive, video distribution, or high-speed filter stages where a slower part would round off the waveform and cost you effective bits. Each channel draws 4.25 mA supply current and can deliver 100 mA output current, giving enough drive to handle 50 Ω back-terminated lines or moderate capacitive loads without an external buffer.
Why the commercial temperature range matters for your BOM
That is fine for bench instruments, office equipment, or indoor telecom gear that lives in a climate-controlled environment. If your system needs to boot at -20°C or run at 85°C ambient, you need the LTC6253IMS#PBF variant which carries the industrial temperature range. The footprint is identical, so swapping the suffix is a BOM change, not a board spin.
Active status — no LTB pressure
That means no last-time-buy clock is ticking, no end-of-life notice is pending in the current planning horizon. The ROHS3 compliance covers current EU and global material restrictions without exemption paperwork.