Skip to main content
Analog Devices LTC3025IDC-1#TRPBF — Discrete Semiconductors
Analog Devices

LTC3025IDC-1#TRPBF Linear Regulator, 500mA

MPNLTC3025IDC-1#TRPBF
End of Life

Analog Devices LTC3025IDC-1#TRPBF, positive adjustable linear regulator, 500mA output, 0.4V to 3.6V output range, 0.17V dropout at 500mA, 80µA quiescent current, 6-WFDFN exposed pad (2x2 mm), -40°C to 125°C.

$5.2Ref. price · indicative, final on quote
LTC3025IDC-1#TRPBF datasheet
Packaging6-WFDFN Exposed Pad
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

LTC3025IDC-1#TRPBF Technical Specifications
ParameterValue
Output typeAdjustable
Mounting typeSurface Mount
Voltage - input5.5V
Voltage dropout0.17V @ 500mA
Voltage - output3.6V
Voltage - output (Min (Fixed))0.4V
Current - output500mA
Current - quiescent80 µA
Operating temperature-40°C ~ 125°C
PackageTape & Reel (TR); Cut Tape (CT)
Case6-WFDFN Exposed Pad
Control featuresEnable
Protection featuresOver Current, Over Temperature, Short Circuit
Number of regulators1
Output configurationPositive

Product details

What this LDO brings to the board

Dropout is specified at 0.17 V maximum at the full 500 mA load. Quiescent current sits at 80 µA. The part is built for industrial temperature spans: -40°C to 125°C operating range, so it can live in outdoor telecom cabinets, engine-bay electronics, or factory-floor sensor nodes without derating concerns.

Package and mounting

Housed in a 6-lead WFDFN with exposed pad (2x2 mm body), the LTC3025IDC-1#TRPBF is a surface-mount part that needs the pad soldered to a PCB copper plane for thermal relief. The small footprint suits dense layouts, but the thermal path is through the pad — a via array under the part is standard practice for keeping junction temperature in check at 500 mA. The Enable pin lets you gate the output for sequencing or power-save modes. Protection includes over-current, over-temperature, and short-circuit shutdown — no external clamp diode needed for the usual fault conditions.

Lifecycle and compliance

The LTC3025IDC-1#TRPBF is listed as Active in production, with ROHS3 compliance.

Frequently asked questions

What is the LTC3025IDC-1#TRPBF package?

The part comes in a 6-lead WFDFN with exposed pad, supplier package designation 6-DFN (2x2 mm). It is supplied in Tape & Reel (TR) or Cut Tape (CT) options.

What is the LTC3025IDC-1#TRPBF equivalent?

A close functional peer is the LT3063HMS8E#TRPBF, also a positive adjustable LDO from Analog Devices, but it offers higher PSRR (85 dB at 120 Hz) and a wider input range (up to 45 V) at a lower 200 mA output. The LTC3025IDC-1#TRPBF is the right pick when you need 500 mA in a smaller 2x2 mm package.