Skip to main content
Analog Devices LTC1799CS5#TRPBF — Clock & Timing ICs
Analog Devices

LTC1799CS5#TRPBF Silicon Oscillator – 1 kHz to 33 MHz

MPNLTC1799CS5#TRPBF
End of Life

Analog Devices LTC1799CS5#TRPBF, Silicon Oscillator, programmable 1 kHz to 33 MHz, 2.7 V to 5.5 V supply, 7 mA supply current, TSOT-23-5 package, 0°C to 70°C operating temperature.

$5.19Ref. price · indicative, final on quote
LTC1799CS5#TRPBF datasheet
PackagingSOT-23-5 Thin, TSOT-23-5
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

LTC1799CS5#TRPBF Technical Specifications
ParameterValue
TypeOscillator, Silicon
Mounting typeSurface Mount
Voltage2.7V ~ 5.5V
Current - supply7 mA
Frequency1kHz ~ 33MHz
Operating temperature0°C ~ 70°C
PackageTape & Reel (TR); Cut Tape (CT)
CaseSOT-23-5 Thin, TSOT-23-5

Product details

Programmable silicon oscillator — one resistor sets the clock

The LTC1799CS5#TRPBF is a silicon oscillator that generates a square-wave clock from 1 kHz to 33 MHz using a single external resistor — no crystal, no ceramic resonator, no external capacitors. The frequency is set by the resistor value; the datasheet provides the formula and a table of standard frequencies. Supply current is 7 mA typical at the high end of the frequency range.

Active production — no obsolescence watch needed

It is ROHS3 compliant and ships in Tape & Reel (TR) or Cut Tape (CT) options.

Sourcing and package fit

The TSOT-23-5 package (also called SOT-23-5 Thin) is a 5-lead surface-mount footprint common on small clock generators and linear parts.

Frequently asked questions

How do I set the frequency on the LTC1799CS5#TRPBF?

A single external resistor between the SET pin and ground programs the output frequency from 1 kHz to 33 MHz. The datasheet gives the formula f = 10 MHz × (10 kΩ / R_SET) and a table of standard resistor values for common frequencies. For 10 MHz, a 10 kΩ resistor is used.

Can the LTC1799CS5#TRPBF replace a quartz crystal oscillator?

Yes, in applications where absolute frequency accuracy of a crystal (±50 ppm) is not required. The LTC1799 is a silicon oscillator with a typical accuracy of ±1.5% at 25°C and ±3% over the full temperature range. It starts up in microseconds with no load-capacitance tuning, which can simplify the BOM and board layout.