Skip to main content
Analog Devices LT6235IGN#PBF — Memory (DRAM / SRAM / Flash / EEPROM)
Analog Devices

LT6235IGN#PBF Analog Devices General Purpose Op-Amp, 60 MHz

MPNLT6235IGN#PBF
End of Life

Analog Devices LT® series LT6235IGN#PBF, General Purpose Amplifier, 4 Circuit, Rail-to-Rail, 60 MHz, 17 V/µs, 3 V to 12.6 V, -40°C to 85°C, Surface Mount, 16-SSOP.

$12.6Ref. price · indicative, final on quote
LT6235IGN#PBF datasheet
Packaging16-SSOP (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

LT6235IGN#PBF Technical Specifications
ParameterValue
SeriesLT®
Output typeRail-to-Rail
Mounting typeSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset75 µV
Voltage - supply span12.6 V
Current - supply1.05mA (x4 Channels)
Current - input bias1.5 µA
Current - output (Channel)55 mA
Operating temperature-40°C ~ 85°C
Gain bandwidth product60 MHz
PackageTube
Slew rate17V/µs
Case16-SSOP (0.154\", 3.90mm Width)
Number of circuits4

Product details

What this quad op-amp brings to the board

The LT6235IGN#PBF is a quad general-purpose rail-to-rail op-amp from the LT® series, packing four amplifiers into a single 16-SSOP package. Each channel delivers a 60 MHz gain-bandwidth product and a 17 V/µs slew rate.

60 MHz GBW and 17 V/µs — what that means on the bench

The 60 MHz gain-bandwidth product sets the usable closed-loop gain × frequency limit. The 17 V/µs slew rate keeps large-signal distortion low up to several hundred kHz.

Input offset and output drive — the practical numbers

Input offset voltage is 75 µV typical. Input bias current is 1.5 µA. Output can source or sink 55 mA per channel.

Lifecycle and sourcing reality

The LT6235IGN#PBF is listed as Active with ROHS3 compliance. No end-of-life notice or last-time-buy window is on record. Sourcing through independent distribution is straightforward — we can quote against an RFQ with current pricing and availability confirmed at quote time.

Frequently asked questions

What are the specifications of LT6235IGN#PBF?

The LT6235IGN#PBF is a quad general-purpose rail-to-rail op-amp with a 60 MHz gain-bandwidth product, 17 V/µs slew rate, 1.05 mA supply current per channel, 75 µV input offset voltage, 1.5 µA input bias current, 55 mA output current per channel, and a supply voltage range of 3 V to 12.6 V. It operates from -40°C to 85°C and comes in a 16-SSOP surface-mount package.

What is the pin configuration of LT6235IGN#PBF?

The LT6235IGN#PBF uses a standard 16-SSOP pinout for a quad op-amp. The supplier device package is 16-SSOP; the datasheet provides the exact pin mapping for the four amplifiers, power supply, and ground.

What is a cross reference or equivalent for LT6235IGN#PBF?

No official cross-reference is listed. For a dual-channel alternative, the ADA4841-2YRMZ-R7 offers 80 MHz GBW and 13 V/µs slew rate but is a dual, not a quad. For a drop-in quad replacement, the LT6235IGN#PBF itself is the correct part.