Skip to main content
Analog Devices LT1792CS8#TRPBF — Logic ICs
Analog Devices

LT1792CS8#TRPBF JFET Op-Amp, 5.6 MHz, 3.4 V/µs, 8-SOIC

MPNLT1792CS8#TRPBF
End of Life

Analog Devices LT1792CS8#TRPBF, JFET single op-amp, 5.6 MHz gain-bandwidth, 3.4 V/µs slew rate, 300 pA input bias, 4.2 mA supply, 9–40 V supply range, 0°C to 70°C, 8-SOIC package, Tape & Reel.

$7.19Ref. price · indicative, final on quote
LT1792CS8#TRPBF datasheet
Packaging8-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

LT1792CS8#TRPBF Technical Specifications
ParameterValue
Mounting typeSurface Mount
Amplifier typeJ-FET
Voltage - input offset200 µV
Voltage - supply span40 V
Current - supply4.2mA
Current - input bias300 pA
Operating temperature0°C ~ 70°C
Gain bandwidth product5.6 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate3.4V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits1

Product details

JFET input stage for high-impedance signal chains

The LT1792CS8#TRPBF: Its 300 pA input bias current and 200 µV input offset make it a natural fit for precision analog front-ends — photodiode transimpedance amplifiers, pH probe buffers, or piezo sensor conditioning — where a bipolar op-amp's microamp bias would swamp the signal.

The 3.4 V/µs slew rate and 5.6 MHz gain-bandwidth product suit audio and instrumentation applications.

Rated for single or split supplies from 9 V to 40 V total, the LT1792CS8#TRPBF can run on ±15 V rails common in industrial analog systems or on a single 12 V or 24 V supply.

Frequently asked questions

What is the difference between LT1792CS8#TRPBF and LT1792CS8?

The electrical specifications — JFET input, 5.6 MHz GBW, 3.4 V/µs slew rate, 300 pA input bias — are identical. The #TRPBF suffix indicates reel packaging for automated pick-and-place assembly.

Can I replace OP07 with LT1792CS8#TRPBF?

The OP07 is a bipolar op-amp with typical input bias current in the nanoamp range, whereas the LT1792CS8#TRPBF is a JFET-input part with 300 pA bias. If your circuit relies on the OP07's low offset voltage drift, the LT1792's 200 µV offset is comparable, but the JFET input stage changes the bias-current error and may require different feedback resistor values. A direct pin-for-pin swap is not guaranteed without reviewing the compensation and load conditions.