Skip to main content
Analog Devices LT1784CS6#TRMPBF — Memory (DRAM / SRAM / Flash / EEPROM)
Analog Devices

LT1784CS6#TRMPBF Analog Devices Over-The-Top® Op-Amp

MPNLT1784CS6#TRMPBF
End of Life

Analog Devices Over-The-Top® series, LT1784CS6#TRMPBF single general-purpose op-amp, 2.6 MHz gain bandwidth, 2.2 V/µs slew rate, rail-to-rail output, 750 µA supply, SOT-23-6 Thin / TSOT-23-6 package, 0°C to 70°C.

$3.88Ref. price · indicative, final on quote
LT1784CS6#TRMPBF datasheet
PackagingSOT-23-6 Thin, TSOT-23-6
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

LT1784CS6#TRMPBF Technical Specifications
ParameterValue
SeriesOver-The-Top®
Output typeRail-to-Rail
Mounting typeSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset1.6 mV
Voltage - supply span2.5 V
Current - supply750µA
Current - input bias250 nA
Current - output (Channel)27 mA
Operating temperature0°C ~ 70°C
Gain bandwidth product2.6 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate2.2V/µs
CaseSOT-23-6 Thin, TSOT-23-6
Number of circuits1

Product details

Single general-purpose op-amp in a TSOT-23-6 — what it covers

The LT1784CS6#TRMPBF from Analog Devices is a single-channel general-purpose op-amp from the Over-The-Top® series. It delivers a 2.6 MHz gain-bandwidth product and a 2.2 V/µs slew rate, enough for audio-band signal conditioning, sensor buffering, and low-speed data-acquisition front-ends. The rail-to-rail output stage swings close to the supply rails, which helps when running from a 2.5 V to 18 V single supply. Supply draw is 750 µA per amplifier, making it a reasonable fit for battery-powered or power-conscious boards where every milliamp matters. The part comes in a TSOT-23-6 package — a thin SOT-23-6 footprint that saves board height compared to a standard SOT-23-6. Temperature grade is commercial, 0°C to 70°C, so it belongs in indoor equipment, office peripherals, or appliance PCBs — not in an engine bay or outdoor enclosure.

Supply range and output drive

The LT1784CS6#TRMPBF operates from a single supply between 2.5 V and 18 V. The rail-to-rail output can source or sink 27 mA per channel.

Frequently asked questions

Where can I buy LT1784CS6#TRMPBF?

This part is sourced through independent distribution and quoted to order against an RFQ. Availability and current pricing are confirmed at the time of quote — submit an RFQ for a firm response.

What is the equivalent part for LT1784CS6#TRMPBF?

The LT1784CS6#TRMPBF is a single general-purpose op-amp in a TSOT-23-6 package. For a zero-drift alternative with lower offset and wider temperature range, consider the ADA4522-1ARMZ-R7 (2.7 MHz GBW, 1.5 µV offset, -40°C to 125°C). For a JFET-input alternative, the AD820ARZ-REEL (1.8 MHz GBW, 2 pA bias, -40°C to 85°C) is a functional peer. Both are different amplifier types — verify the pinout and supply range against your design.

Is LT1784CS6#TRMPBF a single or dual op amp?

It is a single op-amp — one amplifier in the package. The TSOT-23-6 footprint holds one channel.