Skip to main content
Analog Devices LT1783IS5#TRMPBF — Discrete Semiconductors
Analog Devices

LT1783IS5#TRMPBF Analog Devices Op Amp, 1.3 MHz, TSOT-23-5

MPNLT1783IS5#TRMPBF
End of Life

Analog Devices Over-The-Top® series general-purpose op amp, LT1783IS5#TRMPBF, single circuit, 1.3 MHz GBW, 0.45 V/µs slew rate, rail-to-rail output, TSOT-23-5 package, tape and reel.

$4.71Ref. price · indicative, final on quote
PackagingSOT-23-5 Thin, TSOT-23-5
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

LT1783IS5#TRMPBF Technical Specifications
ParameterValue
SeriesOver-The-Top®
Output typeRail-to-Rail
Mounting typeSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset500 µV
Voltage - supply span2.5 V
Current - supply230µA
Current - input bias40 nA
Current - output (Channel)30 mA
Operating temperature-40°C ~ 85°C
Gain bandwidth product1.3 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate0.45V/µs
CaseSOT-23-5 Thin, TSOT-23-5
Number of circuits1

Product details

Single-supply general-purpose op amp for 2.5 V to 18 V rails

The LT1783IS5#TRMPBF is a single-circuit general-purpose operational amplifier from Analog Devices' Over-The-Top® series, offering a gain-bandwidth product of 1.3 MHz and a slew rate of 0.45 V/µs. It operates from a supply span of 2.5 V to 18 V, drawing 230 µA of quiescent current per amplifier — a combination that suits battery-powered or low-headroom signal conditioning where the rail voltage is tight and every microamp counts. The rail-to-rail output stage swings within millivolts of both supply rails, preserving dynamic range in single-supply designs without needing a negative rail.

Parametric fit for signal-conditioning loops

Input offset voltage is 500 µV max, and input bias current is 40 nA — adequate for general-purpose sensor buffering and active filtering where the source impedance stays below a few tens of kilo-ohms. Each channel can source or sink 30 mA of output current, enough to drive an ADC input, a reference buffer, or a small relay coil through a series resistor. The operating temperature range of -40°C to 85°C covers industrial and commercial environments — the TSOT-23-5 package keeps the board footprint small for dense layouts.