Skip to main content
Analog Devices LT1672CS8#PBF — Memory (DRAM / SRAM / Flash / EEPROM)

LT1672CS8#PBF Op-Amp, 12 kHz, 1.9 µA, Rail-to-Rail Output

MPNLT1672CS8#PBF
End of Life

Analog Devices Over-The-Top® series, LT1672CS8#PBF, general-purpose op-amp, single circuit, 12 kHz gain bandwidth, 1.9 µA supply, rail-to-rail output, 8-SOIC package, 0°C to 70°C.

$5.65Ref. price · indicative, final on quote
Packaging8-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

LT1672CS8#PBF Technical Specifications
ParameterValue
SeriesOver-The-Top®
Output typeRail-to-Rail
Mounting typeSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset200 µV
Voltage - supply span2.2 V
Current - supply1.9µA
Current - input bias25 pA
Current - output (Channel)1.5 mA
Operating temperature0°C ~ 70°C
Gain bandwidth product12 kHz
PackageTube
Slew rate0.005V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits1

Product details

What this op-amp is built for

The LT1672CS8#PBF is a single-channel general-purpose op-amp from the Over-The-Top® series. It draws 1.9 µA per amplifier.

12 kHz gain bandwidth — what it means on the bench

The 12 kHz gain-bandwidth product sets a hard ceiling on usable signal frequency. The 0.005 V/µs slew rate reinforces the same message — this is a slow, precision-oriented amplifier.

Supply range and temperature grade

The supply span runs from 2.2 V minimum to 36 V maximum. The 200 µV input offset voltage is typical for a low-power bipolar design.

Lifecycle and compliance

The LT1672CS8#PBF carries an Active product status — no last-time-buy notice, no end-of-life window. It is ROHS3 compliant, so it passes the material declaration for EU and most global markets without an exemption. The Over-The-Top® series branding indicates the input common-mode range extends above the positive supply, but the datasheet should be consulted for the exact headroom — the evidence here does not quantify it.

Frequently asked questions

Is LT1672CS8#PBF RoHS compliant?

Yes, it is ROHS3 compliant, meeting the latest EU restriction levels without exemptions.

What is the difference between LT1672CS8#PBF and LT1672CS8?

The #PBF suffix indicates RoHS3 compliance (lead-free). The LT1672CS8 without the suffix may be an older, non-RoHS variant. Electrically they are identical.

What are the alternatives to LT1672CS8#PBF for a low-power design?

For a lower-power or wider temperature range, the ADA4500-2ARMZ (10 MHz, 1.5 mA per channel, -40°C to 125°C) is a dual alternative with higher bandwidth but much higher supply current. The AD8227ARZ is an instrumentation amplifier with 250 kHz bandwidth and 300 µA supply — different topology but similar power class. Neither is a drop-in replacement; verify pinout and compensation.