Skip to main content
Analog Devices LT1213ACN8#PBF — Memory (DRAM / SRAM / Flash / EEPROM)
Analog Devices

LT1213ACN8#PBF General Purpose Op-Amp, 28 MHz, 12 V/µs

MPNLT1213ACN8#PBF
End of Life

Linear Technology LT1213ACN8#PBF, dual general-purpose op-amp, 28 MHz gain-bandwidth, 12 V/µs slew rate, 2.5 V to 36 V supply, -40°C to 85°C, 8-DIP (0.300", 7.62 mm), through-hole, tube.

$12.6Ref. price · indicative, final on quote
LT1213ACN8#PBF datasheet
Packaging8-DIP (0.300", 7.62mm)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

LT1213ACN8#PBF Technical Specifications
ParameterValue
SeriesLT®
Mounting typeThrough Hole
Amplifier typeGeneral Purpose
Voltage - input offset125 µV
Voltage - supply span2.5 V
Current - supply3.4mA (x2 Channels)
Current - input bias70 nA
Current - output (Channel)50 mA
Operating temperature-40°C ~ 85°C
Gain bandwidth product28 MHz
PackageTube
Slew rate12V/µs
Case8-DIP (0.300\", 7.62mm)
Number of circuits2

Product details

Dual op-amp in a DIP — what it is and where it fits

The LT1213ACN8#PBF is a dual general-purpose op-amp from Linear Technology in an 8-pin DIP package. It delivers a 28 MHz gain-bandwidth product and a 12 V/µs slew rate, running off a single or split supply from 2.5 V to 36 V. The industrial temperature range (-40°C to 85°C) makes it a candidate for outdoor telecom gear, motor-drive signal conditioning, or factory-floor sensor buffers — places where a through-hole part is easier to swap on-site than a surface-mount equivalent. Each channel can source or sink 50 mA, enough to drive a modest ADC input or a long twisted-pair line.

Supply range and input offset — the practical numbers

Supply span from 2.5 V to 36 V covers single-supply and bipolar rails. Input offset voltage is 125 µV typical.

Frequently asked questions

What are the alternatives to LT1213ACN8#PBF?

The ADA4500-2ARMZ (10 MHz, 5.5 V/µs, surface-mount) and AD8646ARZ (24 MHz, 11 V/µs, rail-to-rail output, surface-mount) are functional alternatives but are not pin-compatible due to the SOIC package. The AD827JNZ (50 MHz, 300 V/µs, through-hole) is a faster dual op-amp in the same DIP footprint, but it draws higher supply current and operates only from 0°C to 70°C.

Is LT1213ACN8#PBF available via RFQ confirmation?

Stock levels are not published here. The part is sourced to order against an RFQ; submit a request to confirm current availability and lead time.