Skip to main content
Analog Devices LT1211IN8#PBF — Logic ICs
Analog Devices

LT1211IN8#PBF Dual Op-Amp, 14 MHz, 7 V/µs, 8-PDIP

MPNLT1211IN8#PBF
End of Life

Analog Devices LT® LT1211IN8#PBF — dual general-purpose op-amp, 14 MHz gain-bandwidth, 7 V/µs slew rate, 2.5 V to 36 V supply, 1.8 mA per channel, 150 µV offset, 50 nA bias, industrial temp -40°C to 85°C, 8-PDIP through-hole package.

$5.41Ref. price · indicative, final on quote
LT1211IN8#PBF datasheet
Packaging8-DIP (0.300", 7.62mm)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

LT1211IN8#PBF Technical Specifications
ParameterValue
SeriesLT®
Mounting typeThrough Hole
Amplifier typeGeneral Purpose
Voltage - input offset150 µV
Voltage - supply span2.5 V
Current - supply1.8mA (x2 Channels)
Current - input bias50 nA
Current - output (Channel)50 mA
Operating temperature-40°C ~ 85°C
Gain bandwidth product14 MHz
PackageBulk
Slew rate7V/µs
Case8-DIP (0.300\", 7.62mm)
Number of circuits2

Product details

Package and mounting

The LT1211IN8#PBF is a dual general-purpose op-amp from the LT® series, packing 14 MHz gain-bandwidth product and a 7 V/µs slew rate into an 8-pin PDIP through-hole package. Each channel draws 1.8 mA supply current, with a 50 mA output drive capability.

The supply span from 2.5 V to 36 V means this op-amp can run off a single lithium-ion cell (3.6 V nominal) all the way up to a ±18 V split supply. No extra regulator needed for the op-amp rails in many mixed-signal designs. The wide range also simplifies inventory — one part covers 5 V, 12 V, and 24 V system rails across different product lines.

Industrial temperature grade and through-hole package

The 8-PDIP package is through-hole, which simplifies prototyping and hand-assembly in low-volume or repair environments. No special reflow profile needed — just a socket or solder iron.

Frequently asked questions

Can LT1211IN8#PBF operate on a single supply voltage?

Yes. The supply span is 2.5 V to 36 V, so a single 3.3 V, 5 V, 12 V, or 24 V rail works without a split supply. Just ensure the input common-mode range and output swing are within the rail limits for your signal levels.

What is the difference between LT1211IN8 and LT1211IN8#PBF?

The #PBF suffix indicates lead-free (Pb-free) plating on the leads, compliant with RoHS directives.

What is the equivalent replacement for LT1211IN8#PBF?

No direct pin-compatible drop-in replacement is listed in the official cross-reference. For a functional equivalent with similar speed, consider the AD8646ARZ (24 MHz, 11 V/µs, rail-to-rail output) or the ADA4500-2ARMZ (10 MHz, 5.5 V/µs, very low input bias). Both are surface-mount parts, so a board redesign is required.