Skip to main content
Analog Devices LT1057S8#TRPBF — Logic ICs

LT1057S8#TRPBF Dual JFET Op-Amp, 5 MHz, 13 V/µs, SOIC-8

MPNLT1057S8#TRPBF
End of Life

Linear Technology LT® series, LT1057S8#TRPBF, dual JFET operational amplifier, 5 MHz gain bandwidth, 13 V/µs slew rate, 7 pA input bias, 20 V to 36 V supply, 8-SOIC package, 0°C to 70°C.

$7.72Ref. price · indicative, final on quote
Packaging8-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

LT1057S8#TRPBF Technical Specifications
ParameterValue
SeriesLT®
Mounting typeSurface Mount
Amplifier typeJ-FET
Voltage - input offset220 µV
Voltage - supply span36 V
Current - supply1.7mA (x2 Channels)
Current - input bias7 pA
Operating temperature0°C ~ 70°C
Gain bandwidth product5 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate13V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits2

Product details

Dual JFET op-amp, 5 MHz, 13 V/µs — SOIC-8

The LT1057S8#TRPBF from Linear Technology (LT® series) is a dual JFET-input operational amplifier in an 8-pin SOIC package. It delivers a 5 MHz gain-bandwidth product and a 13 V/µs slew rate, with a typical input bias current of 7 pA and an input offset voltage of 220 µV. Supply range spans 20 V to 36 V total, supporting single-supply operation from 20 V to 36 V or dual supplies up to ±18 V. Each of the two channels draws 1.7 mA supply current.

Supply voltage range — 20 V to 36 V total

The minimum supply span is 20 V and the maximum is 36 V. For a single-rail design that means a 24 V industrial bus or a 28 V avionics rail fits cleanly; for split supplies, ±10 V to ±18 V works. Stay inside that window — the JFET input stage and output swing are optimized for this range, not for 5 V or 3.3 V systems.

Input bias current — 7 pA typical

The JFET front end keeps input bias at 7 pA typical. That matters for high-impedance sources like photodiode transimpedance stages, pH probe buffers, or precision integrators where bias current drift would swamp the signal. The 220 µV offset is also tight enough for most 12-bit signal chains without autozero.

Lifecycle — active, no LTB flag

No last-time-buy notice, no NRND designation. ROHS3 compliant.

Sourcing — quoted to order

Available through independent distribution. We source and quote this exact reel variant (TR suffix = Tape & Reel) against an RFQ.

Frequently asked questions

What is the typical input bias current for LT1057S8#TRPBF?

Typical input bias current is 7 pA, thanks to the JFET input stage.