Analog Devices DS75LVU+T&R digital local temperature sensor, 11-bit resolution, I²C output, 1.7V to 3.7V supply, -55°C to 125°C range, ±2°C accuracy, 8-uMAX/uSOP package, Tape & Reel.
| Parameter | Value |
|---|---|
| Output type | I²C |
| Sensor type | Digital, Local |
| Mounting type | Surface Mount |
| Voltage | 1.7V ~ 3.7V |
| Operating temperature | -55°C ~ 125°C |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Features | Output Switch, Programmable Limit, Programmable Resolution, Shutdown Mode, Standby Mode |
| Resolution | 11 b |
| Case | 8-TSSOP, 8-MSOP (0.118\", 3.00mm Width) |
| Test condition | -25°C ~ 100°C (-55°C ~ 125°C) |
| Accuracy - highest (Lowest) | ±2°C (±3°C) |
| Sensing temperature - local | -55°C ~ 125°C |
It comes in an 8-uMAX/uSOP package — 3.00 mm wide. Surface-mount only, so plan for a reflow profile, not a soldering iron. The Tape & Reel option (TR) is what you want for pick-and-place; the Cut Tape (CT) is fine for prototypes or small runs.
The DS75LVU+T&R is listed as Active with RoHS3 compliance. No last-time-buy notice, no NRND flag — it is a current-production part you can qualify into a new BOM without worrying about a sudden EOL.
Over -55°C to 125°C, the DS75LVU+T&R is rated at ±2°C typical and ±3°C maximum accuracy.
Yes, the DS75LVU+T&R's 1.7V minimum supply voltage means it works directly with 1.8V logic without level translation.
Yes, the DS75LVU+T&R is ROHS3 Compliant.