Maxim DS4510U-15+, Simple Reset/Power-On Reset supervisor, active-low open-drain output, 4.125V threshold, adjustable/selectable reset timeout, -40°C to 85°C, 10-uMAX/uSOP surface-mount package, ROHS3 compliant.
| Parameter | Value |
|---|---|
| Type | Simple Reset/Power-On Reset |
| Mounting type | Surface Mount |
| Voltage - threshold | 4.125V |
| Number of voltages monitored | 1 |
| Operating temperature | -40°C ~ 85°C (TA) |
| Reset | Active Low |
| Output | Open Drain or Open Collector |
| Package | Tube |
| Reset timeout | Adjustable/Selectable |
| Case | 10-TFSOP, 10-MSOP (0.118\", 3.00mm Width) |
Industrial temperature range (-40°C to 85°C) makes it a candidate for motor drives, outdoor telecom enclosures, and factory-floor PLCs where the ambient can swing. The 10-uMAX/uSOP package (3.00 mm width) is small enough to fit on a tight analog input card or a distributed I/O module without eating board space.
No last-time-buy clock to watch.
The reset timeout is adjustable/selectable — you set it with an external component, not a fixed internal delay. This lets you match the reset hold time to the specific processor or FPGA boot-up sequence.