Skip to main content
Analog Devices DS28EC20P+T — Analog & Data Acquisition
Analog Devices

DS28EC20P+T 20Kbit 1-Wire EEPROM, 6-TSOC, Active

MPNDS28EC20P+T
End of Life

Maxim Integrated DS28EC20P+T, 20Kbit EEPROM, 1-Wire® interface, 256 x 80 organization, 6-SMD J-Lead (6-TSOC), -40°C to 85°C, Surface Mount, Tape & Reel / Cut Tape.

$3.47Ref. price · indicative, final on quote
DS28EC20P+T datasheet
Packaging6-SMD, J-Lead
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

DS28EC20P+T Technical Specifications
ParameterValue
Memory typeNon-Volatile
Mounting typeSurface Mount
Memory interface1-Wire®
Operating temperature-40°C ~ 85°C (TA)
PackageTape & Reel (TR); Cut Tape (CT)
TechnologyEEPROM
Memory size20Kbit
Memory formatEEPROM
Case6-SMD, J-Lead
Memory organization256 x 80

Product details

20Kbit 1-Wire EEPROM — what it is and where it fits

The Maxim Integrated DS28EC20P+T is a 20Kbit non-volatile EEPROM communicating over a single-contact 1-Wire® bus. Organized as 256 x 80 bits, it stores serial numbers, calibration constants, or configuration data in a footprint that needs only one GPIO and one ground trace. The 1-Wire interface keeps PCB routing minimal — useful in space-constrained designs like sensor probes, battery packs, or accessory identification where a separate I²C or SPI bus is unavailable. Rated for -40°C to 85°C operation, it fits industrial equipment, outdoor telecom, and factory automation environments.

Lifecycle and compliance

The DS28EC20P+T carries an Active product status — no end-of-life notice, no last-time-buy window to track. ROHS3 compliant, so it passes EU material restrictions without an exemption. For a BOM line that needs a 1-Wire EEPROM today and for the next several years, this part has no discontinuation risk.

Frequently asked questions

How to program DS28EC20P+T?

The 1-Wire interface uses a single data line plus ground. A standard 1-Wire master (GPIO bit-bang or dedicated controller) writes and reads the 256 x 80 array. No external programming voltage is needed — the EEPROM is written from the 1-Wire bus power.

Is DS28EC20P+T RoHS compliant?

Yes — rated ROHS3 Compliant, covering all six original RoHS substances plus the four phthalates. No RoHS exemption required.