Skip to main content
Analog Devices DS2460S+ — DC-DC Power Modules
Analog Devices

DS2460S+ 896-bit I²C EEPROM, 8-SOIC, -40 to 85°C

MPNDS2460S+
End of Life

Maxim Integrated DS2460S+, 896-bit serial EEPROM, I²C interface, 400 kHz clock, 2.7V-5.5V supply, -40 to 85°C, 8-SOIC package, ROHS3 compliant.

$3.69Ref. price · indicative, final on quote
DS2460S+ datasheet
Packaging8-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

DS2460S+ Technical Specifications
ParameterValue
Memory typeNon-Volatile
Mounting typeSurface Mount
Voltage2.7V ~ 5.5V
Frequency400 kHz
Memory interfaceI²C
Operating temperature-40°C ~ 85°C (TA)
PackageTube
TechnologyEEPROM
Memory size896bit
Memory formatEEPROM
Case8-SOIC (0.154\", 3.90mm Width)
Memory organization112 x 8

Product details

896-bit EEPROM for configuration and calibration data

The DS2460S+ is a 896-bit serial EEPROM organized as 112 x 8 bits, communicating over an I²C bus at up to 400 kHz. It stores calibration constants, serial numbers, or configuration parameters that need to survive power cycles.

Active production — no obsolescence watch needed

The DS2460S+ carries an Active lifecycle status and ROHS3 compliance. For a BOM line that needs a small non-volatile store, this part is not on a last-time-buy schedule and has no imminent PCN risk.

Surface-mount footprint and rework

The 8-SOIC package (0.154" body width, 3.90 mm) is a standard footprint shared by thousands of EEPROMs, op-amps, and interface ICs. Hand-solderable for prototypes, and pick-and-place friendly for production. The tube shipping medium is typical for small quantities; reels are available for volume runs.

Frequently asked questions

Can DS2460S+ replace the older DS2460 model?

The DS2460S+ is the current-production variant of the DS2460 family. It is pin-compatible and functionally identical to the original DS2460 in the same 8-SOIC package, with the same I²C interface and memory density. No board spin is required for a drop-in replacement.